Hitachi UX2 Series Basic Operation Manual page 48

Chapter 4. Ink and Makeup Replenishment
2
Hold the IC tag mark of the label on the cartridge bottle over the RFID reader of the printer to read the
ink ID.
● If there is ink remaining in the cartridge bottle even when the bottle is replaceable, do not
replace it but contact your nearest local distributor because some part may be broken.
* If there is no reaction when you hold the cartridge bottle over the reader of the printer, the IC tag of
the cartridge may be damaged.
In this case, you can manually input the ink ID from the IJP screen.
2
(Steps
● If the ink ID is read by the IJ printer, steps
4-4
2
-1 and -2)
RFID reader area
NOTE
2 2
-1 and -2 are not necessary.
IC tag mark
30 mm or less