Hitachi UX2 Series Basic Operation Manual page 42

Chapter 3 Basic Operation
11
Remove the recovery container from the head cleaning unit and drain the makeup in the container.
<<How to remove the recovery container>>
Hold and turn the recovery container until its "△" mark is aligned with the "〇" mark on the head
cleaning unit. Then, slide the recovery container down to remove it from the head cleaning unit.
● Waste solution must be treated according to the local regulations.
● If any vibration or impact is applied to the head cleaning unit after the recovery container is
removed, the solution may leak from the inside.
12
Install the recovery container in the reverse order of the removal operation.
3-26
NOTE
Slide down