Hitachi UX2 Series Basic Operation Manual page 13

2.4. Head Cleaning Unit (Cleaning Station)
The structure of the head cleaning unit is as follows.
Left perspective view
Head cover rest
Place the print head
cover temporarily.
(It is available on both
left and right sides.)
Cable hook
The print head cable can
be hooked on it.
Chapter 2 Component Names and Functions
Right perspective view
Print head slot
Inlet into which the print
head to be cleaned is
inserted.
Recovery bottle
Bottle that collects
the liquid after
cleaning.
Slide block
Used to mount the head
cleaning unit.
Cleaning unit
connecting tube
Tube through which
the wiring and piping
from the printer pass.
(Tube length: 4.5 m)
2-7