Hitachi UX2 Series Basic Operation Manual page 60

Chapter 4. Ink and Makeup Replenishment
3
When the makeup ID is recognized, the lever handle on the makeup side is unlocked.
4
(1) Tilt the lever handle toward yourself, (2) lift it, and (3) remove the cartridge bottle.
● If the lever handle cannot be lifted, do not pull it with excessive force but push the lever handle
all the way in.
● After removing the cartridge bottle from the unit, face the cap upward immediately.
Also, do not expose the removed cartridge bottle to any impact.
Doing so may cause makeup to splatter.
● Do not put waste solution in a used cartridge bottle.
Otherwise, waste solution may spill. Note that a used cartridge bottle is not completely sealed
even when the over cap is mounted.
● If a used cartridge bottle is filled with ink or makeup and reused, ink or makeup may spill.
Lever handle
4-16
NOTE
Push in
Lever handle
NOTE
(1)
Lift the lever handle and remove the empty
cartridge bottle.
(3)
(2)