Remove/Reinstall Gun Fluid Manifold; Clean Gun Fluid Manifold - Graco LineLazer V 200MMA Operation - Repair - Parts

Remove/Reinstall Gun Fluid
Manifold
1. Close Fluid Valves A and B.
2. Loosen retaining bolt and remove Gun Fluid
Manifold (12).
12
3. To reconnect Gun Fluid Manifold (12), tighten
center bolt onto Fluid Housing of Fusion Gun.
3A9099A Operation, Repair, Parts
Maintenance - Fusion MMA PC Gun

Clean Gun Fluid Manifold

Clean Gun Fluid Manifold sealing faces with acetone
and a brush whenever removed from gun. Be sure to
clean the two fluid ports (X) in the top mating surface.
Do not damage the flat sealing surfaces. Coat with
grease if left exposed, to seal out moisture.
53