Maintenance - Fusion MMA PC Gun
Maintenance - Fusion MMA PC Gun
Supplied Tool Kit
•
Hex Nut Driver; 5/16
•
Screwdriver; 1/8 blade
•
Nozzle Drill Bit; See Table 1: Nozzle Drill Bit Sizes,
page 47.
•
Impingement Port Drill Bit; various sizes depending
on port size. See Table 3: Impingement Port Drill
Bit Sizes, page 49.
•
117661 Pin Vise; dual reversible chucks
Reversible
•
551189 Grease Gun; with 3 oz grease
Keep Gun Clean
Keep gun clean with accessory gun cover, page 90.
Applying a light coat of lubricant will make cleaning
easier.
46
Reversible
TI3864a
As Needed
1. Clean Gun Surface, page 52.
2. Clean Spray Tip Adapter and Mix Chamber
Nozzle, page 47, a minimum of once a day.
3. Inspect the Check Valves, page 48.
4. Clean Gun Fluid Manifold, page 53.
5. Clean Passages, page 54.
6. Clean Mix Chamber Impingement Ports, page
49.
Weekly to Monthly
1. Clean Clean Mix Chamber Impingement Ports,
page 49. Check o-rings.
2. Clean/Inspect the Check Valves, page 48. Check
o-rings and filters.
3A9099A Operation, Repair, Parts