Troubleshooting ② - Panasonic F-VXR50A Operating Instructions Manual

TROUBLESHOOTING ②
If a problem is encountered, investigate it by referring first to the table below.
If the problem still persists, please disconnect power plug and contact the dealer for repairs.
The humidity does not
increase
There is condensation
inside the tray
The water fill indicator
is blinking or lit up
Even if there is water in
the tank, the water fill
indicator is still blinking
or lit up.
The check indicator is on
If any of the following conditions occur, please contact the dealer immediately.
The check indicator is on
all the air volume
indicators are blinking
26
Is the room size too big for the product? (Back cover)
After the product stops operation or when the room is cold, there
may be condensation. This is normal.
Is the tray fit into the interior of the product?
product
Please install the product onto the level and stable table or floor.
Is the product overturned?
Disconnect the power plug.
Erect the product. (Wipe the water off it)
Keep the product idle for half a day.
(Doing this is to dry the product thoroughly in case water drops into it.)
Power the product on again, and it will operate.
Have you applied such actions as shaking, tilting and impacting
onto the product?
Disconnect the power plug, and then reinsert it.
Do you put any magnet or metal objects on the product?
Disconnect the power plug, and then reinsert it.
Product may be out of order.
Please disconnect the power plug and send the product to the dealer for
repair.