Step 6 - Installing The Ctrlx Core App - Bosch rexroth ctrlX AUTOMATION Quick Start Manual

14 ctrlX AUTOMATION First Steps
Step 6 – Installing the ctrlX CORE app
4.
For a brief overview on the ctrlX CORE web interface, go to:
CORE basics" on page 23
Step 6 – Installing the ctrlX CORE app
5.6
After the control has been connected in step 5, the apps can now be installed
on the control.
Information on the ctrlX app concept
Upon delivery, only system apps to operate the control are installed on a ctrlX
CORE control.
As for a
installing apps and the requirement of the automation project can be modified.
The Rexroth
Chapter 7 "Rexroth ‒
To supplement the
"Local
Thus, apps can also be installed if there is no internet connection to the Online
store.
The Rexroth Online store is currently designed and not yet available!
For apps, contact your Rexroth marketing contact.
The app is provided as data packet. Save the data packet locally on your engi-
neering PC. The data packet is required in the following steps for installation
purposes on the control.
First Steps – Required apps
To execute the First Steps, the following apps have to be installed on the con-
trol. For more ordering information, refer to
on page 27
App name
"EtherCAT Master app"
"Motion App"
"PLC App"
"OPC UA Server App"
Bosch Rexroth AG R911403760
Log in with the control account already installed by default:
● Username: boschrexroth
● Password: boschrexroth
Select "General Terms of Use"
"Login".
 The ctrlX CORE web interface of the control is started.
"smart device", the functionality of the control can be extended by
"Online store"
"Online store"
"Online
storage". To directly store apps on the control, go to the
Function
EtherCAT Master functionality to com-
municate to the drive or the bus
periphery
Motion functionality to configure and
control axes and kinematics
PLC functionality
OPC UA server functionality to
exchange data
Edition 01
and confirm the login via the button
provides apps for different functions, refer to
" on page 25
.
store", the ctrlX CORE web interface provides the
Chapter 8 "Components used"

Identification in the app packet
rexroth-ethercatmaster_
sion> _arm64.snap
rexroth-motion_
sion> _arm64.snap
rexroth-plc_
sion> _arm64.snap
rexroth-ethercatmaster_
sion> _arm64.snapopcuaserver
 Chapter 6 "ctrlX

"Local storage".
<Ver-
<Ver-
<Ver-
<Ver-