Table of Contents
Advertisement
Quick Links
1
Flowline Starter for Camera & Gimbals w Placid
Stabilizing Arm
(FLCM-FLN-PA-01)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
NOTE: The back mechanism of the support rig may come equipped with either a lever or knob
mechanism based on current availability. Rest assured, whether you receive a vest with a lever or
knob mechanism, there is no change in functionality.
Hook
Support Bar
Flowline Placid
OR
Body Support (With Lever)
Body Support (With Knob)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Table of Contents
Related Manuals for Flycam FLCM-FLN-PA-01
Summary of Contents for Flycam FLCM-FLN-PA-01
- Page 1 Flowline Starter for Camera & Gimbals w Placid Stabilizing Arm (FLCM-FLN-PA-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
-
Page 2: Table Of Contents
Tensioner Spring Safety Shock Cord Bag Packing INDEX Sr. No Particulars Page No. Flycam Flowline Starter (With Lever) Support Bar Assembly Front Section Assembly Support Bar Height Adjustment Camera Mounting Flycam Flowline Starter (With Knob) Support Bar Assembly Placid Arm Mounting... - Page 3 Flycam Flowline Starter (With Lever) NOTE: It is recommended to attach the minimum required weight (3kg / 6.6 lb) for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system. Method 1 Flycam Flowline Starter when Placid Arm is not attached to the support Bar...
- Page 4 • Then front section ko support bar se remove krain. • Now front section ko flip krain or Front section ko support bar se join krain. • Now both knobs ko insert krain or properly tight krain. Remove Camera Hook from support Bar •...
- Page 5 • Separate the Cord and the Cord lock. • Similarly, separate the Cord from the Cup. Attach Camera Hook to the Placid Arm • Insert cord into the placid adapter from the bottom and move it across. • Now Insert cord into the placid arm from the bottom and move it from top.
- Page 6 Camera Hook Attached to the cord • Insert the cord into the cup and pull out from other side. • Then insert cord in the Cord Lock. • After inserting it into the Cup, tie it properly with the Cord Lock. •...
- Page 7 • Fold the rope over the bearing pulley and insert it into the flowline extension arm. • Insert the bolt and properly tighten it with the Allen key. • Now Camera Hook is properly attached to the Placid Arm. Placid Arm Mounting on Support Bar •...
- Page 8 Secure the Placid on Flowline Arm with safety shock chord to ensure slip-free connection. NOTE: This gives the arm stability to handle constant tension and stress placed on it. Method 2 Flycam Flowline Starter when Placid Arm is attached to the Front Section...
-
Page 9: Flycam Flowline Starter (With Lever)
Support Bar Assembly • Join support bar with section of body support by push-fit technique. Front Section Assembly • Support Bar se both knobs ko remove krain. • Now Front section ko support bar se join krain. • Now both knobs ko insert krain or properly tight krain. -
Page 10: Support Bar Height Adjustment
Support Bar Height Adjustment • Loosen all four Adjustment Knobs provided on back of Support Jacket. • Then adjust height (Upward/ Downward) of Support Bar. • After adjusting height tighten all four Adjustment Knobs. Height Adjustable Support Bar Height Adjustable Knobs... -
Page 11: Camera Mounting
Attach camera (Not Included) to hook and tighten with provided knob to ensure slip-free connection. NOTE: It is recommended to attach the minimum required weight (3kg/6.6lb) for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system. - Page 12 • Use lever at back of body support release tension of rope as required. • Use Knob at back of body support tighten tension of rope as required. Flycam Flowline Starter (With Lever)
-
Page 13: Flycam Flowline Starter (With Knob)
Flycam Flowline Starter (With Knob) Support Bar Assembly • Join support bar with section of body support by push-fit technique. Placid Arm Mounting • Loosen Allen bolt of Placid Adapter with help of 4mm Allen Key (Not Included). • Now Placid Adapter ko Support Bar me slide krain. - Page 14 Support Bar Height Adjustment • Loosen all four Adjustment Knobs provided on back of Support Jacket. • Then adjust height (Upward/ Downward) of Support Bar. • After adjusting height tighten all four Adjustment Knobs. Height Adjustable Support Bar Height Adjustable Knobs...
-
Page 15: Support Bar Height Adjustment
NOTE: It is recommended to attach the minimum required weight (3kg/6.6lb) for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system. • Use knob at back of body support to adjust tension of rope as required. - Page 16 NOTE: The knob shown in the given image would only work without the use of placid. It would work only when the camera would be assembled with the rope coming out from the support bar. Install Flycam Flowline Placid and change the Spring, Follow this https://bit.ly/3Ae0t7a...
-
Page 17: Final Setup
YOUR FLYCAM FLOWLINE STARTER FOR CAMERA GIMBALS ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer a one-year warranty for our products from the date of purchase. Within this period, we will repair it without charge for labor or parts. The warranty doesn’t cover transportation costs, nor does it cover a product subjected to misuse or accidental damage.
Need help?
Do you have a question about the FLCM-FLN-PA-01 and is the answer not in the manual?
Questions and answers