System Status - Garmin G1000 NXi Pilot's Manual

SYSTEM STATUS

The system performs an automatic test of TIS during initialization. If TIS passes the test, TIS enters Standby
Mode (on the ground) or Operating Mode (in the air). If TIS fails the initialization test, an annunciation is
shown in the center of the 'Map - Traffic Map' Page.
The traffic mode is annunciated in the upper right corner of the 'Map - Traffic Map' Page. When the aircraft
is on the ground, TIS automatically enters Standby Mode. If traffic is selected for display on another map while
Standby Mode is selected, the traffic display enabled icon is crossed out (also the case whenever TIS has failed).
Once the aircraft is airborne, TIS switches to Operating Mode and traffic information is displayed. The mode
can be changed manually using softkeys or the page menu.
'Map - Traffic
Map' Page Mode
Annunciation
DATA FAILED
NO DATA
OPERATING
OPERATING
STANDBY
UNIT FAILED
* Contact a service center or Garmin dealer for corrective action
190-02177-02 Rev. A
'Map - Traffic Map'
Page Center Banner
Annunciation
Data is not being received from the
NO DATA
transponder.*
Data is being received from the transponder, but
DATA FAILED
a failure is detected in the data stream.*
FAILED The transponder has failed.*
UNAVAILABLE
TIS is unavailable or out of range.
* Contact a service center or Garmin dealer for corrective action.
Table 6-19 TIS Failure Annunciations
'Map - Traffic Map'
Traffic Overlay Status
Page Center Banner
Icon (Navigation Maps)
Annunciation
TRFC FAIL
TRFC FAIL
None
UNAVAILABLE
STANDBY
TRFC FAIL
Table 6-20 TIS Modes and Status Annunciations
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
HAZARD AVOIDANCE
Description
Description
Data is being received from the transponder,
but a failure is detected in the data
stream.*
Data is not being received from the
transponder.*
TIS is operating and is receiving traffic data
from a data link.
TIS is operating, but the traffic service is
currently unavailable or is out of reception
range.
TIS is in Standby Mode.
The transponder has failed.*
335