Garmin G1000 NXi Pilot's Manual page 330

HAZARD AVOIDANCE
The following options are available:
- Stormscope On/Off field – Enables/disables the display of Stormscope lightning symbols.
- Stormscope maximum display range – Selects the maximum map range to display Stormscope symbols.
Stormscope data is removed when a map range greater than the STRMSCP SMBL value is selected.
- Stormscope Mode – Selects the Cell or Strike mode of lightning activity. Cell mode identifies clusters or cells
of electrical activity. Strike mode indicates the approximate location of lightning strikes.
CELL AND STRIKE MODE ON THE NAVIGATION MAP
On the 'Map - Navigation Map' Page, cell mode identifies cells of lightning activity. Stormscope identifies
clusters of electrical activity that indicate cells. Strike mode indicates the approximate location of lightning
strikes.
Figure 6-58 'Map - Navigation Map' Page with Stormscope Lightning Data
310 Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
Stormscope Navigation Map
Overlay Enabled Icon
Stormscope Mode
Lightning Strike Rate
Per Minute
190-02177-02 Rev. A