Garmin G1000 NXi Pilot's Manual page 168

FLIGHT MANAGEMENT
When the Map Pointer is placed on an object, the name of the object is highlighted (even if the name was
not originally displayed on the map). When any map feature or object is selected on the map display, pertinent
information is displayed.
Information about Point of
Interest
When the Map Pointer crosses an airspace boundary, the boundary is highlighted and airspace information
is shown. The information includes the name and class of airspace, the ceiling in feet above Mean Sea Level
(MSL), and the floor in feet MSL.
Panning the map:
1) Push the Joystick to display the Map Pointer.
2) Move the Joystick to move the Map Pointer around the map.
3) Push the Joystick to remove the Map Pointer and recenter the map on the aircraft's current position.
Reviewing information for an airport, NAVAID, or user waypoint:
1) With the desired map page displayed on the MFD, push the Joystick to display the Map Pointer and place the
Map Pointer on a waypoint.
2) Press the ENT Key to display the 'WPT – Waypoint Information' Page for the selected waypoint.
3) Press the Go Back Softkey, the CLR Key, or the ENT Key to exit the 'WPT – Waypoint Information' Page and
return to the 'Map – Navigation Map' Page.
Viewing airspace information for a special-use or controlled airspace:
1) Place the Map Pointer on the boundary of an airspace.
2) Push the Joystick to remove the Map Pointer and center the map on the aircraft.
Or :
148
Figure 5-11 Navigation Map - Map Pointer on Point of Interest
Garmin G1000 NXi Pilot's Guide for the Cessna NAV III
Map Pointer on POI
190-02177-02 Rev. A