1. Manuals
  2. Brands
  3. Minebea Intec Manuals
  4. Scales
  5. Combics 2 Series
  6. Operating instructions manual

Minebea Intec Combics 2 Series Operating Instructions Manual

Complete scales
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions
Combics 2 Series Complete Scales Models CAW2P, CAW2S
98648-018-44
Edition 1.1.0
03/12/2021
Minebea Intec Bovenden GmbH & Co. KG, Leinetal 2, 37120 Bovenden, Germany
Tel.: +49.551.309.83.0 Fax: +49.551.309.83.190

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Combics 2 Series and is the answer not in the manual?

Questions and answers

arta
March 3, 2025

I'm curious about how the time is set in combics 2. Currently, I check the time by printing and then checking the print result to find out the time of the scale. I want to know the time set in the scale without printing.

0

Related Manuals for Minebea Intec Combics 2 Series

Summary of Contents for Minebea Intec Combics 2 Series

  • Page 1 Operating Instructions Combics 2 Series Complete Scales Models CAW2P, CAW2S 98648-018-44 Edition 1.1.0 03/12/2021 Minebea Intec Bovenden GmbH & Co. KG, Leinetal 2, 37120 Bovenden, Germany Tel.: +49.551.309.83.0 Fax: +49.551.309.83.190...
  • Page 2 Any information in this document is subject to change without notice and does not represent a commitment on the part of Minebea Intec unless legally prescribed. This product should only be operated/installed by trained and qualiied personnel. In correspondence concerning this product, the type, name, and release number/serial number as well as all license numbers relating to the product have to be cited.

  • Page 3: Table Of Contents

    Combics 2 Series Complete Scales Models CAW2P, CAW2S Table of contents Table of contents Introduction............................8 Read the manual.................................8 This is what operating instructions look like ......................8 This is what lists look like............................8 This is what menu items and softkeys look like.....................8 This is what the safety instructions look like......................8...
  • Page 4 Combics 2 Series Complete Scales Models CAW2P, CAW2S Table of contents 4.2.5 Leveling the weighing platform ........................25 4.2.6 Acclimatizing the device ..........................26 4.2.7 Connecting Peripheral Devices or Another Weighing Platform ............26 4.2.8 Connecting Peripheral Devices........................29 4.2.9 Operating limits .............................36 4.2.10 Shock resistance.............................
  • Page 5 Combics 2 Series Complete Scales Models CAW2P, CAW2S Table of contents 6.1.6 AUT.STRT.................................66 6.1.7 CLER.CF ................................66 6.1.8 TARE.FNC ................................66 6.1.9 DEF.APP................................67 FN-KEY ..................................67 SETUP ..................................67 6.3.1 WP-1 .................................68 6.3.2 COM-1 ................................74 6.3.3 UNICOM................................79 6.3.4 COM-WP................................84 6.3.5 CTRL IO ................................84 6.3.6 BARCODE ................................86...
  • Page 6 Combics 2 Series Complete Scales Models CAW2P, CAW2S Table of contents 7.1.8 Displaying the content of the identiiers....................97 7.1.9 Scanning barcodes directly ..........................97 7.1.10 Adjustment/Coniguration Counter for Standard Scales ................97 7.1.11 Device parameters............................98 Calibration, adjustment ............................104 7.2.1 Set "Mandatory calibration" function ....................... 105 7.2.2...
  • Page 7 Combics 2 Series Complete Scales Models CAW2P, CAW2S Table of contents 7.10.5 Available Parameter Settings........................132 7.10.6 Example: Weighing in Percent........................134 7.11 Checkweighing application........................... 136 7.11.1 Exit application, delete parameters ......................137 7.11.2 Tare function..............................137 7.11.3 Restore factory default settings .........................137 7.11.4...
  • Page 8 Combics 2 Series Complete Scales Models CAW2P, CAW2S Table of contents 7.17.3 Activating saved product or tare values....................170 7.17.4 Displaying information for a speciic product or tare value..............170 7.17.5 Displaying information for all product or tare memories..............170 7.17.6...
  • Page 9 Combics 2 Series Complete Scales Models CAW2P, CAW2S Table of contents 12.1 General technical data ............................198 12.2 CAW* P / S................................198 12.3 Model-speciic Data ............................... 198 12.4 CAW*S… Model Resolutions ..........................199 Appendix ............................201 13.1 Documents List ............................... 201 13.2...

  • Page 10: Introduction

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 1 Introduction Introduction Read the manual Please read this manual carefully and completely before using the product. This manual is part of the product. Keep it in a safe and easily accessible location.

  • Page 11: Hotline

    1 Introduction Combics 2 Series Complete Scales Models CAW2P, CAW2S NOTICE Warning of damage to property and/or the environment. NOTICE indicates that damage to property and/or the environment may occur if appropriate safety measures are not observed. Take the corresponding safety precautions.

  • Page 12: Safety Instructions

    Check the contents of the consignment for completeness. Check the contents visually to determine whether any damage has occurred during transport. If there are grounds for rejection of the goods, a claim must be iled with the carrier immediately. A Minebea Intec sales or service organization must also be notiied.

  • Page 13: Opening The Device

    Opening the device Before connecting or disconnecting additional devices from the data outputs, the must irst be disconnected from the mains. The may only be opened by trained technicians according to Minebea Intec speciications. 2.4.4 Protective ground connection The protective ground conductor must never be disconnected. Only use standardized extension cables with protective ground conductors.

  • Page 14: Repairs And Maintenance

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 2 Safety instructions Repairs and maintenance 2.6.1 General information Before connecting or disconnecting additional devices from the data outputs, the must irst be disconnected from the mains. Only clean the device according to the cleaning instructions: see Chapter "Care and...

  • Page 15: Device Description

    3 Device description Combics 2 Series Complete Scales Models CAW2P, CAW2S Device description Overview of the device Combics complete scales are Combics: Robust and durable (stainless steel housing) Easy to clean and disinfect Easy to operate thanks to: Large, backlit display elements (14‑segments) Large keys with clearly noticeable pressure point "Workstation"...

  • Page 16: Device Display

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 3 Device description 3.1.1 Device display Legend Pos. Description Load plate 10-key keyboard for entering values Analysis device Check lights (for checkweighing and classiication) Display (for detailed illustration, see Chapter 3.3.3.2) General function keys: Zeroing, taring, switching functions, calibration/adjust- ment, printing/data output (see Chapter 3.3.3.1)
  • Page 17 3 Device description Combics 2 Series Complete Scales Models CAW2P, CAW2S Legend Description Connection options for COM1 standard 2nd UNICOM interface for additional, optional functions (e.g. Ethernet, proibus, etc.) Power cord with country-speciic plug Vent valve: 1.5 Nm Input for menu access switch (standard or legal-for-trade mode) for WP 1 and/...

  • Page 18: Housing

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 3 Device description Housing 3.2.1 Dimensions 3.2.1.1 Indicator (scale diagrams) Dimensions in millimeters. M4 (3x) internal thread *Keyboard diferent than pictured. EN-16 Minebea Intec...

  • Page 19: Display And Operating Elements

    3 Device description Combics 2 Series Complete Scales Models CAW2P, CAW2S Optional: Potentially explosive zone Display and operating elements 3.3.1 General information There are two possible displays: Display for measuring mode (see Chapter 3.3.3.2.1) Display in the "menu mode" (see Chapter 3.3.3.2.2)

  • Page 20: Overview

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 3 Device description 3.3.2 Overview Legend Pos. Description Switch on/of Display (for detailed illustration, see Chapter 3.3.3.2) Other function keys (see Chapter 3.3.3.1) 10-key keyboard for entering values Check lights (for checkweighing and classiication) General function keys (see Chapter 3.3.3.1)
  • Page 21 3 Device description Combics 2 Series Complete Scales Models CAW2P, CAW2S Description Zeroset key Press key for less than 2 seconds: Zero Press key for more than 2 seconds: Display of the calibration/coniguration counter Tare key Save number entry as tare weight...
  • Page 22 Combics 2 Series Complete Scales Models CAW2P, CAW2S 3 Device description Description Gross/net key: Switch display between gross and net value 3.3.3.2 Views in the display There are two possible displays: View for measurement mode (weight values and calculated values) (see Chapter 3.3.3.2.1)
  • Page 23 3 Device description Combics 2 Series Complete Scales Models CAW2P, CAW2S Pos. Description Battery charge status display Symbol for activated GMP protocol Unit of the displayed value Number display e.g. for displaying the reference value Symbol for data transfer Interface initialized (Proibus/Ethernet/DeviceNet) Flashes during data transfer (RS‑232/485)
  • Page 24 Combics 2 Series Complete Scales Models CAW2P, CAW2S 3 Device description Legend Pos. Description Selected menu item (e.g. printer for setting up the connected printer) Menu history (reference to the top menu level in the setup menu) Note that other sub-menus are available Display with language setting "CODES"...
  • Page 25 3 Device description Combics 2 Series Complete Scales Models CAW2P, CAW2S Description Press for less than 2 seconds: Select and save menu item Press for more than 2 seconds: Exit menu, switch to measurement mode Printout of the menu settings from the current position/printout of the info da- 3.3.3.4...

  • Page 26: Device Installation

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 4 Device installation 4 Device installation General information If the Combics indicator has been ordered with special equipment, it will be delivered with the selected options already installed. Mechanical preparation Work steps Set up weighing platform with Level the weighing platform (see Chapter 4.2.5)

  • Page 27: Unpacking

    4 Device installation Combics 2 Series Complete Scales Models CAW2P, CAW2S Aggressive chemical vapors Extreme moisture Extreme vibrations 4.2.3 Unpacking The following applies for devices from a platform size of 60 x 80 cm: Wear protective clothing (safety shoes and, if necessary, gloves) When lifting or transporting the weighing platform, always lift it by its longest sides.

  • Page 28: Acclimatizing The Device

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 4 Device installation Loosen the locknuts on the adjustable feet using a wrench A/F17. Extend or retract the adjustable feet using an Allen key A/F5. Retracting the adjustable feet (turning clockwise) lifts the weighing platform;...
  • Page 29 4 Device installation Combics 2 Series Complete Scales Models CAW2P, CAW2S Pin Assignment Chart (see chapter 4.2.8.2) An Minebea Intec platform (CAAPP, CAAPS) is connected at the factory to the Combics indicator WP1 input. NOTICE Loss of warranty is possible.
  • Page 30 Combics 2 Series Complete Scales Models CAW2P, CAW2S 4 Device installation 4.2.7.2 Preparing Cables Strip approx. 14 cm from the end of the cable. 2. Shorten the shielding to approx. 2 cm and pull back over the insulation. 3. Strip approximately 5 mm of the insulation from the wires of the connecting cable and aix ferrules to the wire ends.

  • Page 31: Connecting Peripheral Devices

    4 Device installation Combics 2 Series Complete Scales Models CAW2P, CAW2S 5. Insert all cores of the cable through the ferrite sleeve and, with one turn around the ferrite sleeve, insert all cores through the ferrite sleeve again. 6. Screw the wires of the interface cable tightly to the terminals as per the terminal assignment diagrams (see Chapter 4.2.8.2).
  • Page 32 Combics 2 Series Complete Scales Models CAW2P, CAW2S 4 Device installation Weighing platform Interface 2 ① Indicator connection ② LED connection ③ Alibi memory connection ④ COM1 terminal assignments (applies to all PCBs) Description Description LOAD_PRINTER Universal In RESET_OUT Control Output "lighter"...
  • Page 33 4 Device installation Combics 2 Series Complete Scales Models CAW2P, CAW2S Indicator connection ② LED connection ③ Terminal assignments interface PCB A6/7 Description Description TxD/RxD+ TxD/RxD- LINE_OUT LINE_OUT Calibration Lock Interface PCB for ADC 10.000e (option A20 or for Types -MCE, -UCE, -RCE)
  • Page 34 Combics 2 Series Complete Scales Models CAW2P, CAW2S 4 Device installation Interface PCB for RS-232/485 for IS-weighing platform (option A62/A72) Com 1 PS/2 A62/72 Weighing platform Interface 2 ① Indicator connection ② LED connection ③ Terminal assignments interface PCB A6/7 and A62/72...
  • Page 35 4 Device installation Combics 2 Series Complete Scales Models CAW2P, CAW2S COM1 female connectors: 25‑pin D‑Submini female connector (DB25S) with screw lock hardware for cable gland Recommended interface connector: 25‑pin D‑Submini (DB25) with shielded cable clamp assembly and shield plate (Amp type 826 985‑1C) and fastening screws (Amp type 164868‑1)
  • Page 36 Combics 2 Series Complete Scales Models CAW2P, CAW2S 4 Device installation Please observe the conditions described in the manual for the weighing platform you connect. 4.2.8.2.3 Cabling Diagram - Connection to a PC Use the following cables to connect a PC to the indicator in accordance with the RS-232C/ V24 standard (max.
  • Page 37 4 Device installation Combics 2 Series Complete Scales Models CAW2P, CAW2S Model CAW2S Indicator side PC side D‑Sub connector Open cable end 9‑pin. or 25‑pin. Sgn GND 5 GND 7 GND 2 TxD 3 TxD 3 RxD 2 RxD 8 DTR...

  • Page 38: Operating Limits

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 4 Device installation The device must be plugged into a properly installed wall outlet. Protection Class 1 Device The device must be plugged into a properly installed wall outlet which has a protective grounding conductor (PE).

  • Page 39: Shock Resistance

    4 Device installation Combics 2 Series Complete Scales Models CAW2P, CAW2S CAW… models Platform size Center Side Corner 320 x 240 400 x 300 500 x 400 500 x 400P* 650 x 500 S** 800 x 600 P* 1200 800 x 600 S**...

  • Page 40: Preload Range (Zero Set Range)

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 4 Device installation Cables and hoses between the weighing platform and other devices may not exert any forces on the weighing platform. These cables may not touch the weighing pan. When setting up systems in hazardous areas (Zone 2 or 22), any relevant speciications should be observed, e.g.: EN60079‑14.

  • Page 41: Optional Interface (Unicom)

    4 Device installation Combics 2 Series Complete Scales Models CAW2P, CAW2S Product Order No. Labels, medium, 58 mm x 76 mm, 500 labels 69Y03093 Labels, large, 58 mm x 100 mm, 350 labels 69Y03094 4.3.2 Optional interface (UniCOM) Product Order No.
  • Page 42 Combics 2 Series Complete Scales Models CAW2P, CAW2S 4 Device installation Product Order No. YCC01-USBM2 Connection cable from RS‑232 data interface to USB interface on the PC, D‑SUB plug 25‑pin, 2 m Digital input/output module to connect Combics 2 to external cont-...
  • Page 43 4 Device installation Combics 2 Series Complete Scales Models CAW2P, CAW2S Product Order No. YCC02-D09M6 for printer YDP05/ZD420, 9‑pin D‑SUB plug, 6 m YCC02-D09F6 for printer YDP21 or PC, 9‑pin D‑SUB socket, 6 m YCC02-D25M6 for Minebea Intec scales, 25‑pin D‑SUB plug, 6 m YCC02-D25F6 for various accessories, 25‑pin D‑SUB socket, 6 m...

  • Page 44: Getting Started

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 5 Getting started Getting started General information You can use the Combics 2 to record weight values from two weighing platforms, calculate and display weight values through application programs, and assign IDs to the samples weighed.

  • Page 45: Menu Mode

    5 Getting started Combics 2 Series Complete Scales Models CAW2P, CAW2S Menu mode 5.4.1 Switch to the menu The individual basic settings are made in the menu mode by selecting the desired parameters. Menu navigation, see Chapter 3.3.3.3. Menu structure, see Chapter 6.

  • Page 46: Set The Language

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 5 Getting started 5.5.1 Set the language Example: Select language "German"; the factory setting for language is "English". Menu: [LANGUAG] or [SPRACHE] Switch on the device with key If it is already switched on: briely switch of and then back on again.

  • Page 47: Setting Up Password Protection

    5 Getting started Combics 2 Series Complete Scales Models CAW2P, CAW2S 7. Use key to exit the menu level in order to make further settings if necessary Press key for more than 2 seconds in order to exit the menu.

  • Page 48: Modify Or Delete Password Protection

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 5 Getting started 5. Press key until [BEN.CODE] is displayed. 6. Press key to open the menu item [BEN.CODE]. The position in which the irst character needs to be entered lashes in the display.
  • Page 49 5 Getting started Combics 2 Series Complete Scales Models CAW2P, CAW2S the most important adjustments and calibrations in the and on the connected weighing platform, e.g. the ADC coniguration. When service mode is activated, this is indicated by an "S" in the upper right-hand corner of the display.

  • Page 50: Activating The Service Mode

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 5 Getting started 1.20 - Calibration site (geographical data, or alternatively, gravitational acceleration at installation site) — BREITE 1.20.1 - Latitude in degrees — HOEHE 1.20.2 - Altitude in meters above sea level —...

  • Page 51: Entering Geographical Data For Legal Metrology

    5 Getting started Combics 2 Series Complete Scales Models CAW2P, CAW2S 7. Adopt service access code with key The service mode is active: an "S" is shown in the upper right-hand corner of the display. 8. Return to menu [SETUP] in service mode with key 5.6.3...
  • Page 52 Combics 2 Series Complete Scales Models CAW2P, CAW2S 5 Getting started acceleration (menu item [ERDBES.] 1.20.3) can be entered. Here, the gravitational acceleration has priority over latitude and altitude: If it is entered, 99999.99 is displayed for the latitude and 9999999 for the altitude. If only the altitude and latitude are entered, 0000000 appears for the gravitational acceleration.

  • Page 53: Entering Calibration And Linearization Weights

    5 Getting started Combics 2 Series Complete Scales Models CAW2P, CAW2S 5.6.3.1 Displaying the geographical values during the calibration procedure Note: The set geographic values are displayed during the calibration procedure if the display of this data is activated in the setup menu at [BETRIEB].

  • Page 54: Function Assignment Of The "Iso Test"Key

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 5 Getting started Procedure Activate service mode (only necessary if linearization weights are entered) (see Chapter 5.6.2). 2. Select the weighing platform. 3. Enter external user calibration weight (menu item [CAL.JUST.] 1.18.1).

  • Page 55: External Linearization

    5 Getting started Combics 2 Series Complete Scales Models CAW2P, CAW2S Not possible for veriied scales 5.6.6 External linearization Setup information External linearization on scales used in legal metrology is only possible when the locking switch is open (see Chapter 7.2.1).

  • Page 56: Set Preload

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 5 Getting started 7. Repeat the procedure for all required linearization weights. After the inal linearization weight has been stored, a prompt appears asking you to unload the load plate completely. 8. Remove the load from the load plate.

  • Page 57: Delete Preload

    5 Getting started Combics 2 Series Complete Scales Models CAW2P, CAW2S 2. Place the preload weight onto the weighing platform. 3. Start "Set Preload" with key After a short time, the preload is adopted and the automatically switches to weighing mode.

  • Page 58: Calibration Without Weight

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 5 Getting started 5.6.9 Calibration without weight In the service mode, calibration can be performed without weight by entering the characteristics of the load cells (e.g. silo weighing with known load cell characteristics).
  • Page 59 5 Getting started Combics 2 Series Complete Scales Models CAW2P, CAW2S — SPEICH. 1.19.8 - Save parameters only visible in service mode only for ADCs from the older Combics generation Procedure Open the locking switch (see Chapter 7.2.1). 2. Activate service mode (see Chapter 5.6.2).

  • Page 60: Menu Structure

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure Menu structure Overview of the complete menu structure; individual setting parameters are listed on the following pages. The indicator only displays the menus that correspond to the available hardware.
  • Page 61 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S Neutral measurement nM application (see chapter 6.1.1.2) — ANIM.WG Animal weighing (averaging) application (see chapter 6.1.1.3) — PERCENT Weighing in percent application (see chapter 6.1.1.4) 6.1.1.1 COUNT. APPLIC. — APPLIC.1...
  • Page 62 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure NEUTR.M — MIN.INIT 3.6 - Minimum load for application — 1 DIGIT 3.6.1 - 1 digit* — 2 DIGIT 3.6.2 - 2 digits — 5 DIGIT 3.6.3 - 5 digits —...
  • Page 63 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — MANUAL 3.18.1 - Manual* — AUTOMAT 3.18.2 - Automatic — ACTIVTY 3.19 - Animal activity — 0.1 PERC 3.19.1 - 0,1% of the animal/object — 0.2 PERC 3.19.2 - 0,2% of the animal/object* —...

  • Page 64: Applic.2

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure — SAVE WT 3.11 - Parameter for saving weight values — STABIL. 3.11.1 - With stability* — ACC.STAB 3.11.2 - With increased stability — REF.WP 3.13 - Reference weighing instrument —...
  • Page 65 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — OFF 4.6.1 - Of* — ON 4.6.2 - On — OK 4.6.3 - Only values within tolerance — NOT OK 4.6.4 - Only values outside tolerance — APP.ZERO 4.7 - Checkweighing toward zero...

  • Page 66: Applic.3

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure — OP.READY 4.3.2 - Ready to operate (for process control systems) — OUTP.ACT 4.7 - Activation of outputs — OFF 4.7.1 - Of — ALWAY.ON 4.7.2 - Always — STABIL.

  • Page 67: Aut.tare

    6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S 3.17.2 - Print the entire standard print coniguration every time when the key is pressed* — ONCE 3.17.3 - Print the entire standard print coniguration once with the * Factory setting 6.1.3.2...

  • Page 68: Min.tare

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure APPLIC. — AUT.TARE 1st weight tared AUT.TARE — OFF 3.7.1 - Of* — ON 3.7.2 - On * Factory setting 6.1.5 MIN.TARE Minimum load for automatic tare and printout APPLIC.

  • Page 69: Def.app

    6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S APPLIC. — TARE.FNC Tare function settings TARE.FNC — NORMAL 3.25.1 - Can add a preset tare if tare value is available; however, no tare function possible* — SPECIAL 3.25.2 - When a preset tare is entered, the tare value is deleted;...
  • Page 70 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure — S-DATE Applications (see chapter 6.3.12) — SER .NO Serial number (see chapter 6.3.13) — MODEL Model description (see chapter 6.3.14) — SQMIN Activates display or GMP-compliant printout (see Chapter 6.3.15) —...
  • Page 71 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — PARAM.1 1 - Parameter 1 PARAM.1 — AMBIENT 1.1 - Adapting the scale to ambient conditions (ilter adjustment) — V.STABLE 1.1.1 - Very stable — STABLE 1.1.2 - Stable* —...
  • Page 72 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure — MOMMES 1.7.16 - Mommes/mom — AUSTR.CT 1.7.17 - Austrian carats/K — TOLA 1.7.18 - Tola/tol — BAHT 1.7.19 - Baht/bat — MESGHAL 1.7.20 - Mesghal/MS — TONS 1.7.21 - Tons/t —...
  • Page 73 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — CAL.UNIT 1.17 - Weight unit for calibration — GRAMS 1.17.1 - Grams* — KILOGR. 1.17.2 - Kilograms — TONS 1.17.3 - Tons — POUNDS 1.17.4 - Pounds — HND.EXT.G 1.18 - Manual entry of the external weight...
  • Page 74 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure — TWN.TAEL 3.1.10 - Taiwan taels/tlt — GRAINS 3.1.11 - Grains/GN — PENNY.WT 3.1.12 - Pennyweights/dwt — MILLIGR. 3.1.13 - Milligrams/mg — PT.P.LB 3.1.14 - Parts per Pound/lb — CHN.TAEL 3.1.15 - Chinese taels/tlc...
  • Page 75 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — ALL 3.4.1 - Show all decimal places* — -1.WT.CHA 3.4.2 - Reduced by 1 digit — RES.×10 3.4.14 - 10-fold increased resolution — +DIV. 2 3.4.15 - Increase resolution by 2 scale intervals —...
  • Page 76 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure 6.3.2 COM-1 SETUP — COM-1 Settings for the RS-232 interface COM-1 — OFF — WP-2 Weighing platform 2 (see chapter 6.3.2.1) — DAT.PROT Data protocols (see chapter 6.3.2.2)* — PRINTER Printer coniguration (see chapter 6.3.2.3)
  • Page 77 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — SMA SMA protocol (see chapter 6.3.2.2.3) * Factory setting 6.3.2.2.1 SETUP — COM-1 Settings for the RS-232 interface — DAT.PROT Data protocols — SBI SBI protocol — CONFIG.
  • Page 78 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure 6.3.2.2.1.2 DAT.OUTP SETUP — COM-1 Settings for the RS-232 interface — DAT.PROT Data protocols — SBI SBI protocol — DAT.OUTP 6 - Data outputs DAT.OUTP — MAN./AUT 6.1 - Data output (manual/automatic) —...
  • Page 79 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S * Factory setting 6.3.2.2.2 XBPI.232 SETUP — COM-1 Settings for the RS-232 interface — DAT.PROT Data protocols — XBPI.232 xBPI-232 protocol (RS232-Mode) 6.3.2.2.3 SETUP — COM-1 Settings for the RS-232 interface —...
  • Page 80 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure 6.3.2.3.1 YDP20 SETUP — COM-1 Settings for the RS-232 interface — PRINTER Printer coniguration — YDP20 YDP20 printer YDP20 — CONFIG. 5 - Coniguration — BAUD 5.1 - Baud rate —...

  • Page 81: Unicom

    6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — EVEN 5.2.4 - Even — NONE 5.2.5 - None — STOPBIT 5.3 - Number of stop bits — 1 Bit 5.3.1 - 1 stop bit* — 2 BITS 5.3.2 - 2 stop bits...
  • Page 82 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure — CAL.JUST. 1.18.1 - Cal/Adj. weight — … … more menus [CAL.SEQ.] 1.10 … [RESET] 9.1 as under WP1 (see chapter 6.3.1) — ADU-232 ADU-232 protocol (RS232-Mode) — …...
  • Page 83 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S 6.3.3.2.1 POFIBUS SETUP — UNICOM Settings for the 2nd optional interface — DAT.PROT Data protocol — POFIBUS Proibus interface POFIBUS — ADDRESS — 0 … 126 Addresses 0 … 126 can be selected —...
  • Page 84 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure — IND.AFTR 6.1.2 - Manual after stability* — PROT.PRN 6.1.7 - Protocol printout — PROT.W/O 6.1.8 - Protocol printout without stability — LINE 7.2 - Data output: Line format —...
  • Page 85 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — 250K 250K — 500K 500K — QUICK.CO Using quick connect — NO — YES Yes activate — APPL.DAT Using application data — NO — YES Yes activate * Factory setting 6.3.3.3...

  • Page 86: Com-Wp

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure — MAX 8.15 - Max. (20 mA) input in kg — TRIM 8.16 - Analog output: output value comparison — 4 MA 8.16.1 - 4 mA measured value entry —...
  • Page 87 6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — X10 8.4.14 - Trigger key function — B/G NET 8.4.15 - Trigger key function — 1.EXTERN. 8.17 - External control input 1 — PRINT 8.17.1 - Trigger key function* —...

  • Page 88: Barcode

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure * Factory setting 6.3.6 BARCODE SETUP — BARCODE Settings for barcode function BARCODE — REFERNC. Save value directly as reference* — TARE Save value as tare value — ID1 Save as ID1 —...

  • Page 89: Utilit

    6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — 2 PRNT.O 7.9.2 - 2 printouts — INDIV.2 7.10 - Single and results printout for all other applications, user-deined — COMPON.2 7.11 - Component printout for net total and totalizing, user-deined —...
  • Page 90 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure PARAMET — SIGNAL 8.2 - Acoustic Signal — ON 8.2.1 - On* — OFF 8.2.2 - Of — ON.GREEN 8.2.3 - — KEYS 8.3 - Release keypad — ALL + 8.3.1 - Release all*...

  • Page 91: Time

    6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — START.WP 8.11 - Main scale: irst platform displayed on start-up — WP-1 8.11.1 - Weighing platform 1* — WP-2 8.11.2 - Weighing platform 2 — DIS.GEOG 8.12 - Show geographical data before calibration/adjustment —...

  • Page 92: Ser .No

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure 6.3.13 SER .NO SETUP — SER .NO Serial number — 12345 Serial number 6.3.14 MODEL SETUP — MODEL Model description — CL20001 Model description 6.3.15 SQMIN SETUP — SQMIN...

  • Page 93: Service

    6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S Alibi memory settings (optional) (see chapter 6.4.6) 6.4.1 SERVICE INFO — SERVICE Service date — 00.00.00 Input: day.month.year (e.g. 13.08.10), conirm with the U.S. mode: month.day.year (e.g. 08.13.10) 6.4.2...

  • Page 94: Flexinf

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure 6.4.5 FLEXINF INFO — FLEXINF FlexPrint settings FLEXINF — ------- File-Name — ID--- — V.--- Version 6.4.6 ALIB.MEM INFO — ALIB.MEM Alibi memory settings (optional) LANGUAG Language setting for display and printout LANGUAG —...

  • Page 95: Verif

    6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S — RANGE 1 11.5.4 - Range 1 — RANGE 2 11.5.5 - Range 2 — RANGE 3 11.5.6 - Range 3 — MAX. 11.5.7 - Max. load — MULT.RNG 11.6 - Multiple-range scale...
  • Page 96 Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure — MAX. 11.6.7 - Max. load — WT.UNIT 11.7 - Available weight units — FREE 11.7.1 - User-deined/o — G 11.7.4 - Grams/g — KG 11.7.5 - Kilograms/kg — …...

  • Page 97: Operating

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Operating Weighing This application is always available in operation. Characteristics: Zero with key Adopt tare weight from the scale with key Tare container weight automatically Enter tare weight via bar code scanner...

  • Page 98: Automatic Printout

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating In this case "display increment" stands for the partial increment of the connected weighing platform. If the partial increment is 1 g and 1000 display increments are required, the minimum load is 1000 g (1000 increments) .

  • Page 99: Displaying The Content Of The Identiiers

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S To do this, the [HEADER] setting must be activated. Then press the key until the desired ID entry appears, scan the barcode and save. 7.1.8 Displaying the content of the identiiers key.

  • Page 100: Device Parameters

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Zero setting range (menu item [ZERORNG] 1.11) Tare/zero at power on (menu item [INIT.ZER] 1.12) The above parameters are reset to factory settings (menu item [RESET] - [WT.PARA] - [YES] 9.1.1) (see chapter 6.3.1.1.3).
  • Page 101 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Example 2: Weighing with numeric entry of the tare weight, print result (see Chapter 7.1.11.8) 7.1.11.1 Password protection Menu: [SETUP]- [BEN.CODE] (see also Chapter 6.3.11) Access to the [SETUP] device parameters and the application parameters [ANWEND] can be protected against unauthorized adjustment with a password in the setup menu under [BEN.CODE] (see Chapter 5.5.2).
  • Page 102 Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating The display for the unloaded scale appears. 2. Press the key to zero the scale. The zeroed scale display appears. 3. Place the container on the weighing platform. The container weight is displayed.
  • Page 103 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 5. Fill with the sample (here, e.g.120.2 g) The display for tared scale with weighing result appears. 6. Press the key to switch the display. Depending on the default setting, the following is displayed: the gross weight (here, e.g.170.2 g = 50 g container + 120.2 g sample)
  • Page 104 Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 7. Press the key to switch to the previous display. Display of the net weight value as before switching. EISENSCHMIDT GOETTINGEN 12.08.2016 15:10 -------------------- 170.2 g 50.0 g 120.2 g -------------------- 8.
  • Page 105 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 2. Enter the tare weight in the current weight unit using the keypad (e.g. 250 g). 3. Press the key to save the tare value. 4. Place the container on the scale.

  • Page 106: Calibration, Adjustment

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating GMP header (only if GMP-compliant printout is coni- -------------------- gured) (see chapter 6.3.7.1 menu item [GMP.PROT] 7.13) 24.08.2016 15:15 CAW2P1-3DC-L Ser.no. 12345678 Vers. C2 100.200810 BVers. 01-62-01 Ser.no. A 12345678...

  • Page 107: Set "Mandatory Calibration" Function

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Lock the key so that the functions speciied above cannot be triggered: Menu [SETUP]- [WP-1]- [INTERN.]- [PARAM.1]- [CAL.JUST]- [GESPRT] (1.9.10) "Key locked" (see also Chapter 6.3.1.1.1). Calibration and automatic or manual adjustment (not for veriied scales): Menu [SETUP]- [WP-1]- [INTERN.]- [PARAM.1]- [CAL.ABL.] (1.10) "Calibration/...

  • Page 108: Example: External Calibration

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating The locking switch is located on the rear panel of the indicator, immediately adjacent to the weighing platform connector. Remove the cover cap. Push the switch to the left (= position "open", setting for mandatory calibration).
  • Page 109 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 3. Place the calibration/adjustment weight onto the weighing platform. The diference between the measured value and the true weight (calibration/ adjustment weight) is displayed with the algebraic sign. If the the procedure is canceled by pressing the key, a protocol is printed out.

  • Page 110: Internal Calibration/Adjustment

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating -------------------- 24.02.2016 10:15 CAW2P1-3DC-L Ser.no. 12345678 Vers. C2 111.031112 BVers. 01-62-02 Ser.no. A 12345678 -------------------- Ext. Kalibrieren Soll 10000 g Diff. + Ext. Justieren Diff. + -------------------- 24.02.2016 10:17 Name:...
  • Page 111 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S The diference between the measured value and the true weight of the sample will be displayed with plus/minus signs. A printout will be generated if the process is cancelled using the key.

  • Page 112: Sqmin-Funktion

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating SQmin-Funktion To display the allowable minimum sample quantity "SQmin" (sample quantity minimum) in accordance with the United States Pharmacopoeia (USP). According to USP guidelines, the uncertainty of measurement may not exceed 0.1 % of the sample quantity when substances are weighed with the highest degree of accuracy for volume determination.

  • Page 113: Data Id Codes (Identiier)

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 2. Place th esample on the scale. The minimum sample quantity is not reached (symbol ⚠). 3. Print the weight value with key. 90.0! 4. Place another sample on the scale.

  • Page 114: Example: Using Individual Id Codes

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Displaying individual IDs: press the key. The name is left-justiied and the value is right-justiied on the printout. If the entire code is too long for one line, additional lines are printed.

  • Page 115: Application Programs

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 12. To exit the sub-menu, press the key several times. Application Programs 7.6.1 Overview of Applications and Functions Keys 17 keys plus numeric keypad Display 14-segment plus pictograms Application Basic weighing...

  • Page 116: Exit Application, Delete Parameters

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Features Save the reference weight "wRef" from the weighing platform Enter the average piece weight "wRef" via the keypad Enter the reference sample quantity "nRef" via the keypad Enter reference sample weight using a barcode scanner...

  • Page 117: Available Parameter Settings

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Entering the reference piece weight, see chapter 7.7.4.2 Reading the reference piece weight, see chapter 7.7.4.3 7.7.4.1 Calculating the reference piece weight Place the number of parts deined as the reference sample quantity on the weighing platform and calculate the average piece weight by pressing the key.
  • Page 118 Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating — RESOLUT 3.9 - Resolution for calculation of reference piece weight — DISP.ACC 3.9.1 - Display accuracy* — 10 FOLD 3.9.2 - plus 1 decimal place (10 fold) — 100FOLD 3.9.3 - plus 2 decimal places (100 fold)
  • Page 119 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S the point at which the luctuation of a measured value lies within a deined tolerance. The narrower the tolerance, the more stable the platform is at "stability". The [ACC.STAB] (3.11.2) "increased stability" setting has a lower tolerance so that the average piece weight saves is more accurate and the results more reproducible;...

  • Page 120: Example: Counting

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating The reference scale is the irst scale active when you switch on the device, regardless of the setting for automatic initialization of the application. 7.7.5.5.2 Counting with one reference platform and one weighing platform In this operating mode, the reference platform is a high-resolution weighing platform with a relatively low maximum capacity.
  • Page 121 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 4. Enter the number of parts using the keypad. 5. Start the calculation of the reference piece weight with key. 6. Set the number of reference parts using key: 1, 2, 5, 10, 20, etc.

  • Page 122: Neutral Measurement Nm Application

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Neutral Measurement nM application With this "Neutral Measurement" application you can measure the length, surface and volume of parts that have roughly the same speciic weight. The "o" symbol is displayed as the unit.

  • Page 123: Reference Weight

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 7.8.4 Reference weight In order to calculate the length, surface or volume of a given sample, the average weight of a reference quantity of the sample must be known (in the example below, the reference is 1 meter of electrical cable).
  • Page 124 Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating — 5 DIGIT 3.6.3 - 5 digits — 10 DIGT 3.6.4 - 10 digits — 20 DIGT 3.6.5 - 20 digits — 50 DIGT 3.6.6 - 50 digits — 100 DIG 3.6.7 - 100 digits...
  • Page 125 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S The default setting is [DISP.ACC] (3.9.1) "display resolution." The resolution is increased when [10 FOLD] (3.9.2) "10-fold" or [100FOLD] (3.9.3) "100-fold" is selected. "10-fold" increases the resolution of the net value by one step (display resolution x 10), "100-fold"...

  • Page 126: Example: Neutral Measurement

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 7.8.6 Example: Neutral Measurement 25 m of electrical cable is to be measured. Coniguration: The "Neutral Measurement" iapplication is selected, and printout has been set up (see chapter 7.16). Place empty container on the scale.

  • Page 127: Averaging (Animal Weighing) Application

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 7. Print results key (Coniguring Printouts, see chapter 7.16). nRef wRef 0.248 kg 6.794 kg 0.541 kg 6.253 kg 25 o -------------------- Averaging (Animal weighing) application With this "Animal weighing"...

  • Page 128: Tare Function

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Setting: [APPLIC.] - [CLER.CF] (3.24) (see chapter 6.1.7). 7.9.2 Tare function If you store a tare (weight value) by pressing the key, you can later enter a tare value manually. The tare value you enter is added to the stored tare value.
  • Page 129 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S — 2 DIGIT 3.6.2 - 2 digits — 5 DIGIT 3.6.3 - 5 digits — 10 DIGT 3.6.4 - 10 digits — 20 DIGT 3.6.5 - 20 digits — 50 DIGT 3.6.6 - 50 digits...

  • Page 130: Example: Averaging (Animal Weighing)

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating must place at least 1000 g (= 1000 intervals = 1000 digits) on the weighing platform for initialization. 7.9.6.2 Starting the Measurements The averaging routine does not begin until the luctuation in weight value remains below a deined threshold over three consecutive measurements.
  • Page 131 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 3. Place the mouse in the container. 4. Enter the number of sub-weighing operations using the keypad (in this example, 20 measurements). 5. Save the value entered and start the averaging with key.

  • Page 132: 7.10 Weighing In Percent Application

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Note: If automatic printout of results is enabled, you do not need to press the key. The results are printed automatically. Printout coniguration, see chapter 7.16. mDef 0.292 kg x-Net + 0.183 kg...

  • Page 133: Exit Application, Delete Parameters

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 7.10.1 Exit application, delete parameters The value of the reference sample weight in the reference memory remains active until it is deleted via the key or overwritten or until the application is changed.

  • Page 134: Available Parameter Settings

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Note: The entered value remains active until deleted by pressing the key or until overwritten by a new value. It remains saved after the scale is switched of. 7.10.5 Available Parameter Settings...
  • Page 135 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Select menu [APPLIC.] - [APPLIC.1] - [PERCENT] with key and open with key (see chapter 6.1.1.4). 2. To save the setting, press the key. 3. To exit setup: Press the key several times.

  • Page 136: Example: Weighing In Percent

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 7.10.5.5 Weighing in Percent with Two Weighing Platforms You can use two weighing platforms simultaneously with the Weighing in Percent application. When using two platforms, you can choose from the following operating modes: Weighing in percent with two platforms of the same type (see chapter 7.10.5.5.1).
  • Page 137 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 3. Add reference material to the container in accordance with reference percentage value (in this example, 85 g). 4. Start the calculation of the reference weight by pressing the key.

  • Page 138: 7.11 Checkweighing Application

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 6. Print the results with key. Note: If automatic printout of results is enabled, you do not need to press the key. The results are printed automatically. Printout coniguration, see chapter 7.16.

  • Page 139: Exit Application, Delete Parameters

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S The target value can be applied as weighed values and via relative weight limits (menu item [INPUT] - [TAR.TOL.] 4.5.4). Target and tolerance limits checked during input; values must conform to: upper limit >...

  • Page 140: Available Parameter Settings

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating You can also deine upper and lower tolerance limits based on this target. You can do this Entering absolute values using the keypad or placing the desired amount of weight...

  • Page 141: Results Display As A Weight Or Limit Value Representation

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S — ON 4.7.2 - On (symbol is displayed) * Factory setting Select menu [APPLIC.] - [APPLIC.2] - [CHECK.WG] with key and open with key (see chapter 6.1.2.1). 2. To save the setting, press the key.

  • Page 142: Example 1: Checkweighing

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Digital Input/Output Interface 170% 170% Activation of port lines: always on Activation of port lines: within "Set" control output: set or ready for use "Set" control output: set or ready for use...
  • Page 143 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Start target value and tolerance entry using the key. The target value symbol lashes at the top of the display. 2. Place a sample with the target weight (in this example, 1250 g) on the platform.

  • Page 144: Example 2: Checkweighing

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 6. Enter upper limit value (in this example, 1280 g). 7. Save the upper limit value with key. Because the sample with the target weight is still on the weighing platform, the weight is shown on the display with the checkweighing bars.
  • Page 145 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Start target value and tolerance entry using the key. The target value symbol lashes at the top of the display. 2. Place a sample with the target weight (in this example, 1250 g) on the platform.

  • Page 146: Example 3: Checkweighing

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 7.11.10 Example 3: Checkweighing Checkweighing toward zero. Checkweighing samples with a target weight of 1250 g and a tolerance range from –10 g to +30 g. Coniguration: The "Checkweighing" application [APP.ZERO] - [ON] (4.7.2) "Checkweighing toward zero"...

  • Page 147: 7.12 Classiication Application

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 8. Remove the sample with the target weight from the weighing platform. 9. The samples can now be checked one after the other. The LEDs next to the display indicate the results:...

  • Page 148: Exit Application, Delete Parameters

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Enter the upper limits of weight classes as absolute values or as a percentage of deviation from the upper limit of Class 1 Setting: [APPLIC.] - [APPLIC.2] - [CLASS.] - [PARAM.2] - [INPUT] (4.9) (see chapter 6.1.2.2.2).

  • Page 149: Limits

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 7.12.4 Limits To use the Classiication application, you need to enter the delimiters that separate one class from another. Limits between the individual weigh classes are required for the classiication. The lower limit of Class 1 is deined by the preset minimum load. The other classes are conigured by deining their upper limits.

  • Page 150: Results Display As Weight Or Class Representation

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating — 200 DIG 3.6.8 - 200 digits — 500 DIG 3.6.9 - 500 digits — 1000 DI 3.6.10 - 1000 digits PARAM.2 — CTRL.SET 4.3 - Activate SET control output —...

  • Page 151: Digital Input/Output Interface

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 7.12.7 Digital Input/Output Interface The Classiication application supports the digital input/output-interface. The four outputs are activated as follows: With 3 classes: Class 1 ? red LED (output <) Class 2 ? green LED (output =) Class 3 ? yellow LED (output >)

  • Page 152: Example: Classiication

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Digital Input/Output Interface K 1/2 K 2/3/4 K 4/5 Control lines when working with 3 classes Control lines when working with 5 classes Min. load Max. load Operative K1…K5 Class 1…5 The [OUTPUT] (4.3.1) "Set"...
  • Page 153 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 2. Enter the lower limit for Class 1 using the keypad (in this example 110 g). 3. Save the lower limit for Class 1 with key. 4. Enter the upper limit for Class 1 using the keypad (in this example 130 g).

  • Page 154: 7.13 Totalizing Applications

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 7.13 Totalizing applications With this "Totalizing" application, you can add weights to the totalizing memory. In addition to weight values, the number of separate values added to memory is also saved.

  • Page 155: Restore Factory Default Settings

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 7.13.3 Restore factory default settings Setting: [APPLIC.] - [RESET] (9.1) (see chapter 6.1.9). 7.13.4 Totalizing memory The Combics has a totalizing memory for adding individual net and gross values. You can save weight values in totalizing memory manually or automatically.

  • Page 156: Example: Totalizing

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 3.17 - Individual/Component printout when saved — OFF 3.17.1 - Automatic printing of — HEADCOM Automatic printing on — EACH.TIM 3.17.2 - Print the entire standard print coniguration every time when the...
  • Page 157 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Place the irst weight on the weighing platform. The weight value is displayed. 2. Store irst weight value in totalizing memory with key. Item is printed automatically ((component log). 0.250 kg 0.000 kg...

  • Page 158: 7.14 Net Total Application

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 4. Store second weight value in totalizing memory with key. Item is printed automatically (component log). 1.346 kg 0.346 kg 1.000 kg The transaction counter value is increased by one (to 2).

  • Page 159: Available Parameter Settings

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Additive mode: Display the weight of all components on the platform (after it is saved, the net weight of the last component added is displayed briely) Toggle to a second weighing platform while weighing in...

  • Page 160: Net Total Formulation With Two Weighing Platforms

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 7.14.1.1 Minimum load for application The minimum [MIN.INIT] (3.6) amount that a component must weigh before it can be saved in nettotal memory. Setting: [APPLIC.] - [APPLIC.3] - [NET TOT] - [MIN.INIT] (3.6) (see chapter 6.1.3.1).
  • Page 161 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Coniguration: The "Net total formulation" application is selected, and printout has been set up (see chapter 7.16). Setting printout: [SETUP] - [PRINT] - [PROTOC.] (7) (see chapter 6.3.7.1) Component log: menu item [COMPON.1] (7.7).
  • Page 162 Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating The component record is printed automatically. Cmp001+ 1.100 kg The weighing platform is tared and the component counter value is increased by one. The prompt to ill and save the second component is now displayed.
  • Page 163 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S The value displayed equals the weight of components added up to now plus the current weight on the platform. 8. Place the third component into the container until the desired total weight is reached (in this example, 2000 g).

  • Page 164: 7.15 Combining Application Programs

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Number of components Content of component memory Tot.cp+ 2.000 kg Content of tare memory (container weight) Cont.T+ 0.296 kg –------------------ 7.15 Combining Application Programs The following table shows how the applications described can be combined. The basic weighing function is available at all times;...
  • Page 165 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Setup: Printout: [PROTOC.] - [TOTAL 1] (7.8) (see chapter 6.3.7.1 Printer 1: "Total printout: Print when FN pressed", then select the menu line items of your choice. Place empty container on the scale.
  • Page 166 Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 6. Start Checkweighing with key. 7. Enter target value, minimum and maximum (in this example, target 100 pieces, minimum 100 pieces, maximum 102 pieces). 8. Toggle to totalizing with key.

  • Page 167: 7.16 Coniguring Protocol Printing

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 11. Perform further counting operations as desired. 12. Toggle display from individual value to total with key. 13. End the portioning options and print the inal evaluation with key. Conigured printout: Total...

  • Page 168: Available Parameter Settings

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Automatic printout of the application when the setup menu is activated: Animal weighing (averaging) Checkweighing Classiication To output the component protocol: Totalize/generate net total by pressing Setting: [ANWEND.]- [ANWEND3]- [SUMME]- [DRUCK.UEB] (3.17) "Component printout"...

  • Page 169: Printing The "Selection/List" Settings

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S The print selection set as active appears with the left selection bar on the display, e.g. gross, tare, net. Select menu [SETUP] - [PRINT] - [PROTOC.] (7) with key and open with key (see chapter 6.3.7.1).
  • Page 170 Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating Then access Setup: Printout: Printer 1: "Individual: print by pressing " Select the [SETUP] menu with key and open with key. 2. Select the [PRINT] supmenu with key and open with key.
  • Page 171 7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S 9. Press the key to add the displayed print item from the selection list to the list of print items. 10. Press the key until the line row appears in the display.

  • Page 172: 7.17 Product Data Memory

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 7 Operating 7.17 Product Data Memory The product data memory stores initialization data and user data (product and tare values). Features The product data memory has 100 memory cells for product or tare values. For example, you can store 80 sets of application data and 20 tare values Each memory cell is uniquely identiied by a number of up to three digits.

  • Page 173: Deleting Speciic Memory Numbers

    7 Operating Combics 2 Series Complete Scales Models CAW2P, CAW2S Press the key to activate the selected memory number. Press the key to display the saved product values. Press and hold the key (min. 2 seconds) to delete the selected memory number.

  • Page 174: Data Interfaces

    The free cable ends are connected via screw terminals. When using third-party or commercially available RS‑232 connection cables: NOTICE The pin assignments are often not compatible with Minebea Intec devices. Non-compliance can lead to errors or to the damage to the and any peripheral devices connected to it.

  • Page 175: Analog Unicom Interface (Optional)

    8 Data interfaces Combics 2 Series Complete Scales Models CAW2P, CAW2S Handshake operating mode: Software (XON/XOFF), Hardware (1 character accor- ding to CTS) Protocols: 1)2) SBI, XBPI‑232 , XBPI-485 , MP8 binary , SMA va- rious printers: YDP20-OCE Universal YDP14IS...
  • Page 176 Combics 2 Series Complete Scales Models CAW2P, CAW2S 8 Data interfaces Universal printer (user-deined transmission parameters) The following devices can also be connected to COM1: Foot / Hand switch PC (RS‑232 interface) 2nd weighing platform (RS‑232 interface) External checkweighing display (stop light) via a digital I/O The following devices can also be connected to the optional UniCOM: PC (RS‑232 interface)

  • Page 177: Conigure Data Interface As Communication Interface (Datprot)

    8 Data interfaces Combics 2 Series Complete Scales Models CAW2P, CAW2S 8.2.3.3 Connecting a printer The COM1 standard interface, the optional UniCOM universal interface or both can be used as a printer interface. 8.2.3.4 Use as a communications interface The data protocol can be set to the following operating modes for operation as a...

  • Page 178: Sma Communication

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 8 Data interfaces Output of a conigurable printout protocol with or without standstill (menu item [MAN./AUT]- [PROT.DRK] 6.1.7) and 6.1.8). Output is linked to the menu item "Print protocols" ([DAT.PROT]) (see Chapter 7.16).
  • Page 179 8 Data interfaces Combics 2 Series Complete Scales Models CAW2P, CAW2S Command Meaning Info about , output example: "C2/016202/1" Meaning: Analysis device: Combics 12, software version: 016202, active weighing platform: 1 kF1_ F1: Activate key kF2_ F2: Activate key kF3_...

  • Page 180: Data Output Format

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 8 Data interfaces Command Meaning a4xxx_ Output of Alibi memory data log with the transaction number xxx Write next stable weight value to the Alibi memory Press ESCP to write the stable weight value previously requested to the Alibi memory.
  • Page 181 8 Data interfaces Combics 2 Series Complete Scales Models CAW2P, CAW2S CR: Carriage Return LF: Line Feed Special operation Position 10 11 12 13 14 15 16 – – CR LF CR LF CR LF CR LF CR LF CR LF *: Blank space –...

  • Page 182: Output Format With 22 Characters

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 8 Data interfaces 8.5.2 Output format with 22 characters Normal operation Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 K K K K K K + A A A A A A A A A * E E E CR LF K K K K K K –...
  • Page 183 8 Data interfaces Combics 2 Series Complete Scales Models CAW2P, CAW2S Display Description Net value Tare 1 application Tare 2 application Diference during calibration Target Exact calibration weight value Nom. Exact calibration weight value on output of SBI protocol nRef...

  • Page 184: External Keyboard Functions (Pc Keyboard)

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 8 Data interfaces Example: Output of the weight value +1255.7 g Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 G # * * * * + * * * 1 2 5 5 .

  • Page 185: Conigure Data Interface As Printer Interface (Printer)

    8 Data interfaces Combics 2 Series Complete Scales Models CAW2P, CAW2S Conigure data interface as printer interface (PRINTER) One or two strip printers or one or two label printers can be connected to Combics. The interfaces COM1 and UniCOM are conigured as the printer interface in the menu item [DRUCKER] (see Chapter 6.3.2.3...
  • Page 186 Combics 2 Series Complete Scales Models CAW2P, CAW2S 8 Data interfaces and holding down the key. In this case, the symbol is visible in the display after the GMP header has been printed until the GMP footer is printed. If the scale is changed while a GMP printout is being output over multiple measurement results ([EIN] 7.13.2), pressing the...

  • Page 187: Sample Protocols

    8 Data interfaces Combics 2 Series Complete Scales Models CAW2P, CAW2S GMP footer: Dotted line -------------------- Date/time 14.01.2021 09:45 Field for signature Name: Blank line Dotted line -------------------- Sample protocols For an explanation of the individual blocks of information, see the "Coniguring print output"...
  • Page 188 Combics 2 Series Complete Scales Models CAW2P, CAW2S 8 Data interfaces "Neutral measurement" application: The initialization data block contains the reference quantity and the reference weight. The results block contains the gross, net and tare weights and, as a result, the item quantity.
  • Page 189 8 Data interfaces Combics 2 Series Complete Scales Models CAW2P, CAW2S In the poor range, "HH" is printed if the weight exceeds the limit, and "LL" is printed if the weight falls below the limit. Good range in the weight and limit value display –------------------...
  • Page 190 Combics 2 Series Complete Scales Models CAW2P, CAW2S 8 Data interfaces Example: Printing 2 items KOPFZEILE1 KOPFZEILE2 14.01.2016 09:43 –------------------ 2.400 kg 0.200 kg 2.200 kg Standard printout The item counter is not printed. Example: Printing 2 items 2.400 kg 0.200 kg...
  • Page 191 8 Data interfaces Combics 2 Series Complete Scales Models CAW2P, CAW2S GMP protocol "Linearization" protocol -------------------- 14.01.2016 13:00 CAW2S Ser.no. 12345678 Vers. C2 100.280810 BVers. 01-61-01 -------------------- Linearisieren Gew.1 + 7.00 kg Gew.2 + 15.00 kg Gew.3 + 22.00 kg Gew.4 +...
  • Page 192 Combics 2 Series Complete Scales Models CAW2P, CAW2S 8 Data interfaces "Set preload" protocol -------------------- 14.01.2016 13:50 CAW2S Ser.no. 12345678 Vers. C2 100.280810 BVers. 01-61-01 Ser.no. A 12345678 -------------------- Vorlast setzen abgeschlossen -------------------- 14.01.2016 13:52 Name: -------------------- "Delete preload" protocol -------------------- 14.01.2016...
  • Page 193 8 Data interfaces Combics 2 Series Complete Scales Models CAW2P, CAW2S "Weighing" protocol with several measurement results (Example: 2 measurement results): -------------------- 14.01.2016 09:43 CAW2S Ser.no. 12345678 Vers. C2 100.280810 BVers. 01-61-01 Ser.no. A 12345678 -------------------- KOPFZEILE1 KOPFZEILE2 14.01.2016 09:43 –------------------...

  • Page 194: Maintenance/Repairs/Cleaning

    9 Maintenance/repairs/cleaning Maintenance/repairs/cleaning Maintenance Regular maintenance preformed on your device by an employee of Minebea Intec Customer Service will ensure continued measurement accuracy. Minebea Intec can provide you with maintenance contracts with cycles from one month up to two years. The frequency of the maintenance intervals depends on the operating conditions and the tolerance requirements of the operator.

  • Page 195: Cleaning

    9 Maintenance/repairs/cleaning Combics 2 Series Complete Scales Models CAW2P, CAW2S Cleaning 9.3.1 Instructions for cleaning 9.3.2 Corrosive Environment Remove all traces of corrosive substances from the device on a regular basis. 9.3.3 Cleaning the interior of the weighing platform (CAW… models only) Remove the load plate.

  • Page 196: Safety Check

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 9 Maintenance/repairs/cleaning Safety check Safe operation of the device is no longer guaranteed: If the device or the power cord display visible damage. If the power supply unit installed in the no longer works.

  • Page 197: 10 Disposal

    10 Disposal Combics 2 Series Complete Scales Models CAW2P, CAW2S 10 Disposal If the packaging is no longer required, please take it to your local waste disposal facility and/or a reputable disposal company or collection point. The packaging largely consists of environmentally friendly materials which can be used as secondary raw materials.

  • Page 198: 11 Error Messages

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 11 Error messages 11 Error messages A diferentiation is made between the following errors: Dynamic errors are displayed with an error code (e.g. INF 01) for the duration of the error. Temporary errors are displayed for 2 seconds (e.g. INF 07) Fatal errors are displayed permanently (e.g.
  • Page 199 11 Error messages Combics 2 Series Complete Scales Models CAW2P, CAW2S Display Cause Remedy INF 10 Tare not possible with assigned tare memory Taring will only be possible again after de- leting the application program. INF 18 Preload too low...

  • Page 200: 12 Technical Data

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 12 Technical data 12 Technical data 12.1 General technical data Additional data interface option Display 20 mm LCD, 14‑segment plus status symbols, backlit Housing: Material AISI 304 stainless steel (1.4301) Dust and water protection acc.

  • Page 201: Caw*S

    12 Technical data Combics 2 Series Complete Scales Models CAW2P, CAW2S Model type: CAW*P…-L CAW*P…-I CAW*P…-S CAW*P…-BCE CAW*P…-NCE (2 x 3000 e) Readability Weighing range 1 Weighing range 2 Weighing 15000 d 30000 d 60000 d 1 x 3000 e...
  • Page 202 Combics 2 Series Complete Scales Models CAW2P, CAW2S 12 Technical data 1)2) 1)2) 2 x 3.000 e 3 x 3.000 e 6.000 e Multi Intervall -MCE Multi Range -UCE -RCE Weighing Reso- Weighing Reso- Weighing Reso- Weighing Reso- Weighing Reso-...

  • Page 203: 13 Appendix

    13 Appendix Combics 2 Series Complete Scales Models CAW2P, CAW2S 13 Appendix 13.1 Documents List Operating Instructions UniCOM interfaces: 98647-004-24 Standard ield bus interface: 98646-002-04 Veriiable alibi memory: 98647-004-40 Installation Instructions Use in Zone 2 and 22 potentially explosive atmospheres (option Y2): 98647-004-70 13.2 Minebea Intec Services...

  • Page 204: 13.4 Certiicates

    Combics 2 Series Complete Scales Models CAW2P, CAW2S 13 Appendix Ser. no. Model Type CAW...-CE Minecomb 13.4 Certiicates Ser. no. Description Document no. EU Declaration of Conformity MIB17CE003 EU-type examination certiicate T11379 Test Certiicate D09-11.02 Manufacturer’s certiicate SIS14ATEX003X Safety Information 65954-750-16 13.5 General Password...
  • Page 205 (Typ Minecomb) Typ Waage: Minecomb Typ Auswertegerät: TA EG Bauartzulassung T11379 + Prüfschein D09-11.02...
  • Page 206 Typ Waage: Minecomb Typ Auswertegerät: TA EG Bauartzulassung T11379 + Prüfschein D09-11.02...
  • Page 207 Option Y2 Typ Waage: Minecomb Typ Auswertegerät: TA EG Bauartzulassung T11379 + Prüfschein D09-11.02...
  • Page 208 CAW3S1-60FE-NCE <-- Zeichen für die EG-Eichung (Marke mit Messtechnik M) Typ Waage: Minecomb Typ Auswertegerät: TA EG Bauartzulassung T11379 + Prüfschein D09-11.02...
  • Page 209 CAW3S1-60FE-NCE Typ Waage: Minecomb Typ Auswertegerät: TA EG Bauartzulassung T11379 + Prüfschein D09-11.02...
  • Page 216 Explosion-safe area Explosion-risk area zone 2 or zone 22 Gas: Group IIC, temperature class T4 Dust: Group IIIC, Tmax 80°C Ambient temperature: -10°C to +40°C 1. Power connection Use explosion-protected connector Connector of equipment supplied Alternative connections Note 16) Indicator CAIS. Note 8) complete scale CAW...-..-..
  • Page 217 Explosion-risk area zone 2 or zone 22 Explosion-safe area Gas: Group IIC, temperature class T4 Dust: Group IIIC, Tmax 80°C Ambient temperature: -10°C to +40°C 3. Connecting weighing platforms Data output with Note 8) supply voltage Indicator 16 VDC CAIS. with option Y2 ADC output with bridge rated voltage 9 VDC (±4.5 VDC)
  • Page 218 These safety instructions apply to installation, use, maintenance, and repair The equipment (indicator CAIS., weighing platform CAAP..-……-……, complete scale CAW…-……-…...) is suitable for use in explosion-risk areas of zone 2 (group IIC, temperature class T4 / T6 for the weighing platform) and zone 22 (group IIIC;...
  • Page 219 During installation, take suitable steps to prevent stray electrical interference (e.g. due to magnetic fields). Keep any voltage transients away from the equipment. The indicator (display unit of the complete equipment) should be installed so that there is only a low risk of mechanical danger to the IP protection.
  • Page 221 Appendix: General Password After selecting the “Setup” menu item a request to enter the access password “BEN.Code” will be displayed for 2 seconds. The first digit in the display flashes. Combics 2 Numbers and the point can be entered via the number pad. Combics 1 and 2 Select characters using the k and p keys k key displays: Numbers in ascending order (0 to 9)
  • Page 224 Published by Minebea Intec Bovenden GmbH & Co. KG | Leinetal 2 | 37120 Bovenden, Germany Phone: +49.551.309.83.0 | Email: info@minebea-intec.com www.minebea-intec.com...

This manual is also suitable for:

Caw2pCaw2s

Table of Contents

Save PDF