Linear Analog Devices DC2605A Demo Manual page 8

DEMO MANUAL DC2605A
LTPOWERPLAY QUICK START PROCEDURE
Then, click the "W" (PC to RAM) icon to write these regis-
ter values to the LTC3884-1. After finishing this step, you
will see the output voltage will change to 1.2V.
If the write is successful, you will see the following mes-
sage:
8
e. You can save the changes into the NVM. In the tool bar,
click "RAM to NVM" button, as following
f. Save the demo board configuration to a (*.proj) file.
Click the Save icon and save the file with a user file-
name.
dc2605af