Related Manuals for MRC LOM-150-UV
Summary of Contents for MRC LOM-150-UV
- Page 1 Operation manual for LOM-150-UV 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 2 Switch Switch Timer Power Switch Remark: 1. Please turn on the cooling system below 30ºC degrees 2. Don't look into the plant lamp when it lights. 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 3 Description / Function Power switch Power off ① Power switch Power on ② For setting and calling up parameters. ③ ④ To increase the value of digits. 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 4 To display process value, menu symbol and error code. To display set point value, parameter value or control output ⑧ value. ⑨ Process Unit Indicator- Celsius 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
-
Page 5: Setting The Temperature
Similarly, when the switch is turned off, or if the compressor shuts off in case of a power failure, the compressor will not restart for a few 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... -
Page 6: Setting Parameter
Set the PASS value to your desired function PASS Value Access Rights = 1000 All parameters are changeable = 1008 Only user menu parameters changeable (original value) 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com... - Page 7 The two points OFTL and OFTH construct a straight line. For the purpose of accuracy, it is best to change the value same on the two points as possible. 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 8 After the Auto-Tuning process is completed, the TUNE indicator will stop flashing and the unit will revert to PID control by using its new PID values. The PID values obtained are stored in nonvolatile memory. 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 9 Used to lock in the set time and speed ENTER Used to proceed to the next step in programming MODE Shows the segment of the program (1-9 segments) 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 10 1. To use the timer, flip both the power and timer switch up to turn them ON. Make sure the axis is line to run 24 hour program type. 2. Adjust the clock; make sure the time is correct. 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
- Page 11 3. Switch the control axis by hand, inside is timer on, and outside is timer off. 1 segment is 15 minutes. 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
-
Page 12: Circuit Diagram
Circuit diagram 3, Hagavish st. , Holon,Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com...
Need help?
Do you have a question about the LOM-150-UV and is the answer not in the manual?
Questions and answers