Kimball Office Xsede Height Adjustable Assembly Instructions

Advertisement

Xsede
Height Adjustable
IMPORTANT SAFETY INFORMATION for L-Base
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product
DANGER – To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Unplug from outlet before putting on or taking off parts.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the
manufacturer.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or
dropped into water. Return the furnishing to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
7. Never drop or insert any object into any opening.
8. Do not use outdoors.
9. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
10. To disconnect, turn all controls to the off position, then remove plug from outlet.
11. For chairs and similar furnishings with movable parts such as foot supports the
following statement:
"WARNING: Risk of Injury – Keep children away from extended foot support (or other similar parts)."
12. For grounded products the following statement:
"WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding Instructions."
13. For loading always put heavier items at the bottom and not near the top in order to help prevent the possibility of the furnishing
tipping over.
14. If a surface is not intended to support video monitors such as televisions or
computer monitors, one of the following statements:
'Warning: Risk of Injury to Persons – do not place video equipment such as
televisions or computer monitors on ________" where the blank is filled in to
identify the particular surface
"Warning: Risk of Injury to Persons – do not use this furnishing to support video equipment such as televisions or computer moni-
tors."
15. Each surface intended to support a load shall have a corresponding statement in the use instructions specifying the maximum
intended load for that surface in pounds and (kilograms). Refer to 31.3.1.
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
Part 2918189, Revision A
Assembly Instructions
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Xsede Height Adjustable and is the answer not in the manual?

Questions and answers

Summary of Contents for Kimball Office Xsede Height Adjustable

  • Page 1 (kilograms). Refer to 31.3.1. Proper product installation, in accordance with these instructions, is the responsibility of the installing agent. If you have any questions concerning these instructions, please call Kimball Office Customer Care. Part 2918189, Revision A...
  • Page 2: Grounding Instructions

    SULATION” or “DOUBLE INSULATED.” The symbol (square within a square) is also able to be marked on the product. SKETCH A Proper product installation, in accordance with these instructions, is the responsibility of the installing agent. If you have any questions concerning these instructions, please call Kimball Office Customer Care. Part 2918189, Revision A...
  • Page 3: Tools Required

    Mounting Blade Mounting Long Tubes Blade Screws Proper product installation, in accordance with these instructions, is the responsibility of the installing agent. If you have any questions concerning these instructions, please call Kimball Office Customer Care. Part 2918189, Revision A...
  • Page 4 * = L, LL, LW, W (SEE 2850657 FOR WORKSURFACE DRAWING) Proper product installation, in accordance with these instructions, is the responsibility of the installing agent. If you have any questions concerning these instructions, please call Kimball Office Customer Care. Part 2918189, Revision A...
  • Page 5: Up/Down Switch

    23" DEPTH 36" LENGTH 42" LENGTH 48" LENGTH Proper product installation, in accordance with these instructions, is the responsibility of the installing agent. If you have any questions concerning these instructions, please call Kimball Office Customer Care. Part 2918189, Revision A...

Table of Contents