Menu Structure; Automatic - ProLights LUMIPAR7IRTRI User Manual

8

3.3 MENU STRUCTURE

MAIN FUNCTION SELECTION
Static Color C--
P--
Auto Program
Speed program S--
Custom Static
U--
Color
Remote control SEr
3-CH
Personality
7-CH
STANDALONE OPERATION

3.4 AUTOMATIC

If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme:
• Press the button MENU so many times until the display shows [P--], then press the button ENTER.
• Press the button UP/DOWN to select the desired program [P--1 - P--4]. Press the button ENTER to confirm.
- P--1 7 color program (switching)
- P--2 7 color program (fading)
- P--3 3 color program (switching)
- P--4 3 color program (fading)
- P--5 7 color program (sound active)
- P--6 3 color program (sound active)
You can adjust the speed of execution of the auto program:
• Press the button MENU so many times until the display shows [S--].
• Press the button UP/DOWN to select the desired run speed [S--1 - S100]; press the button ENTER to con-
firm.
LUMIPAR7 IRTRI
SUB-SELECTION
C-01
C-02
C-03
C-04
C-05
C-06
C-07
P--1
P--2
P--3
P--4
P--5
P--6
S001 - S100
R000 - R255
G000 - G255
b000 - b255
S000 - S020
On
Off
d001 - d512
DESCRIPTION
Red
Green
Blue
Cyan
Magenta
Yellow
White
7 - color program (switching)
7 - color program (fading)
3 - color program (switching)
3 - color program (fading)
7 - color program (sound active)
3 - color program (sound active)
Program speed for P1 - P4
Combine Red, Green and blue to create a custom, static color
Turns infrared on or off
Select DMX starting address and personality