Part 4 - Maintenance And Cleaning; Cleaning And Care Of The Appliance - Tecnoinox CP35G7 Manual

WHAT TO DO WHEN THE APPLIANCE IS NOT GOING TO BE USED FOR A LONG TIME
Close the gas shut-off cock installed above.

CLEANING AND CARE OF THE APPLIANCE

Warning
Cleaning operations must only be carried out once the appliance has cooled.
Keeping the appliance clean is very important for a long and trouble-free working life. The
removable parts should be washed separately with warm water and detergent, then rinsed with
running water. Do not use harsh or abrasive detergents to clean the stainless steel parts.
MAINTENANCE
The appliances do not require special maintenance other than cleaning.
MAINTENANCE - CHECKS - CONTROLS - CLEANING
General cleaning of the appliance and the surrounding areas
Cleaning
Check proper functioning of safety devices
Safety devices
Check the conditions, check that there are no deformations, loosening or
Mechanical protections
removals.
Check readability and conditions of the inscriptions and symbols and repair
Control
if necessary.
Check the mechanical part to make sure that it is not broken or deformed,
tighten the screws.
Structure of the appliance
Tighten the main bolts (screws, fasteners, etc.) of the appliance
Check readability and conditions of safety signs.
Safety signs
Check the conditions of the electrical components in the electrical control panel.
Electrical control panel /
electronics
Check the wiring between the electrical panel and parts of the appliance.
Check the conditions of the connection cable and plug socket.
Electrical connection cable
and plug socket
Replace if defective.
Replace motor bearings
Motor bearings (if present)
ECOLOGY AND ENVIRONMENT
Our appliances are studied and optimised via lab tests, in order to provide high performance
and yields. However, in order to reduce energy consumption (electricity, gas and water), we
suggest that you do not use the appliance for long time periods if empty or in conditions that
can compromise optimum yield. All packaging materials are environment-friendly. They can
be kept without creating problems or burnt in a waste incinerator plant.
Warning
The plastic components that can be recycled are:

Polyethylene: external packaging film and/or pluribol film

Polypropylene: straps

Polystyrene foam: corner pieces, protective sheets and blocks.
5410.264.00 - English

PART 4 - MAINTENANCE AND CLEANING

Clean the appliance with soapy water, rinse it, dry it thoroughly and apply a light layer of
liquid paraffin.
Iron cleaning pads should not be used as they may cause the formation of rust. For the same
reason, avoid contact with ferrous materials.
When cleaning, avoid using abrasive paper or cloth; instead and only in special cases you
can use pumice stone powder; we recommend using sponges (e.g. Scotch Brite
stubborn deposits. If spray products are used, follow the manufacturer's instructions. To
minimise the emission of polluting substances into the environment, we suggest cleaning the
appliance with products that are at least 90% biodegradable.
The appliance should be checked once a year by a repair service. For this purpose a
maintenance contract should be stipulated.
FREQUENCY
Daily or based on
the degree of use
Monthly
Monthly
Yearly
Yearly
Yearly
Yearly
Yearly
Every three years
Recycling
At the end of the appliance's useful life, dispose of it properly.
Our appliances are made with 90% or more metal materials (stainless steel, iron, aluminium
sheet metal, etc.); therefore, they can be recycled by the relative recycling organisations in
compliance with the standards in force in your country.
Prepare the appliance for disposal, so it is no longer functional, by removing the power cable
and any locks so as to avoid somebody accidentally getting locked inside.
®
) to remove
REPAIR SERVICE
USER
-
Yes
-
Yes
-
Yes
Yes
Yes
Yes
Yes
Yes
-
Yes
Yes
Yes
-
Yes
Yes
Yes
-
Yes
-