Construction; Type Plate; Installation And Connection; Installing The Diaphragm Globe Valve - GEM iComLine CleanStar C57 HPW Installation, Operating And Maintenance Instruction

9

Construction

5
2
7
4
6
Construction
1
Valve body
2
Handwheel
3
Bonnet
4
Tube / Pipe connections
5
Optical position indicator
6
Mounting lug
7
Leak detection hole
DANGER
Do not open the bonnet!
® Risk of severe injury or death!
® Manufacturer's warranty will be
9.1

Type plate

Device version
Design in accordance with order data
12103529 I 0001
Traceability number
Item number
The month of manufacture is encoded in
the traceability number and can be obtained
from GEMÜ.
The product was manufactured in Germany.
C57 HPW
3
1
voided.
Device-specific data
Serial number
28 / 44

10 Installation and connection

Prior to installation:
Ensure that valve body and seal material
G
are appropriate and compatible to handle
the working medium.
See chapter 5 "Technical data".
10.1 Installing the
diaphragm globe valve
WARNING
The equipment is subject to pressure!
® Risk of severe injury or death!
Only work on depressurized plant.
G
WARNING
Corrosive chemicals!
® Risk of caustic burns!
Wear appropriate protective
G
gear when installing.
CAUTION
Hot plant components!
® Risk of burns!
Only work on plant that has
G
cooled down.
CAUTION
Never use the diaphragm globe valve
as a step or an aid for climbing!
® This entails the risk of slipping-off or
damaging the diaphragm globe valve.
CAUTION
Do not exceed the maximum
permissible pressure!
® Take precautionary measures to
avoid possible pressure surges
(water hammer).
Installation work must only be performed
G
by trained personnel.
Use appropriate protective gear as
G
specifi ed in plant operator's guidelines.