Table of Contents
Advertisement
10. OUTLINE OF OPERATION
10. OUTLINE OF OPERATION
Since there is a cutter at the paper outlet, be careful not to injure your fingers when
issuing labels.
POWER key
NOTES:
1. You can register a password to prohibit unauthorized access to each menu expect for REG.
menu.
2. To avoid wasteful use of the display, press the POWER key to turn the display off while being
unused. Pressing the POWER key again allows you to enter REG. mode without scanning.
3. Refer to respective sections for explanation each menu enclosed by a double rectangle.
4. In the self service scale mode (the initial setting #13-2 is set to 1) the POWER , and ESC.
keys are available in the following cases.
5. In the self service scale mode (the initial setting #13-2 is set to 1), these keys are unavailable.
If you would like to switch the initial setting #13-2 to 1, please contact your authorized TOSHIBA TEC
representative.
Get user manuals:
See SafeManuals.com
Main Power
Switch ON
Display OFF
Press the
POWER key
1
Scanning Display
Press the
NOTE4
Press
ESC Key
No Press
Menu No. 1
MARK DOWN
REG Menu
(Refer to Section 14)
(Refer to Section 14)
Menu No. 3
REWRAP Menu
(Refer to Section 14)
NOTE5
Press
POWER key
No Press
NOTE5
Press
ESC. key
No Press
Return to
each mode
POWER key:
Available after the main power switch turns ON.
ESC. key:
Available after the POWER key is depressed while scaling.
WARNING!
2
Main Menu
NEXT
or
PLU
Increment
Menu
Select the
#1
2
Menu #
Other than Menu #1.
Unnecessary
Password
Necessary
Password Input
Menu No. 2
Menu No. 5
READ Menu
Menu
(Refer to Section 12, 15)
Menu No. 0
PROG Menu
(Refer to Section 11)
Display OFF
1
<Menu>
2
0. PROG.
1. REG
2. MARK DOWN
3. REWRAP
4. SECURITY
10-1
10. OUTLINE OF OPERATION
VOID
Decrement
Menu No. 4
SECURITY
Menu
(Refer to Section 13)
Menu No. 6
RESET Menu
(Refer to Section 15)
5. REPORT
6. RESET
7.
8.
9.
EM1-31064
Advertisement
Table of Contents
