Table of Contents
Advertisement
14. OPERATING PROCEDURES
14.13 FLOATING VENDOR
Floating vendor function allows you to register different commodities sales together. This function is
available when the Initial Setting #11-1 is set to 1 and using a receipt.
Be sure to select IN-LINE in Section 11.15 LON SYSTEM even if no scale is connected, then enter
the ID# 1, turn the power off and then on.
Maximum number of registerable commodities
One scale:
One vendor:
Enter the PLU#
Press:
Place a commodity on
the platter.
Press the speed key to which
the group vendor # is assigned.
Enter the last digit
of the number.
NOTES: 1. Print format varies depending on the settings of the
Get user manuals:
See SafeManuals.com
Menu: REG
Mode: WEIGH, FIX, or BY COUNT
200 commodities
99 commodities
2
PLU
Group Vender
<REG.>
APPLE
Initial Setting #11-1, 11-2, 11-3, 11-4 and 11-7.
2. Care must be taken for the following when a clerk
label is printed.
(1) Cleark labels can not be used with Floating
Clerk (receipt) in a system.
1) The clerk accumulation memory is used for
the Floating Clerk's.
If the Clerk labels and Floating Clerk are
used in the same system, the registered
data by Floating Clerk (receipt use) and
Clerk labels will be stored into the same
memory.
0
lb
UNIT/$
1.000
1.00
14-20
14.13 FLOATING VENDOR
Direct Vendor
Press the speed key the
vendor # is assigned to.
10
1
Vendor #
Item Count
TOTAL $
1.00
(Sample label)
EM1-31064
Clerk name
Advertisement
Table of Contents
