6. PROCEDURE BEFORE OPERATION
6. PROCEDURE BEFORE OPERATION
1. Unpack the accessories and scale from the carton.
2. Install the remote display on the scale. (See Page 7-1.)
3. Refer to Safety Precautions in this manual and set up the scale in a proper location.
4. Load the label or receipt. (See Page 9-1.)
5. Be sure to insert the power cord plug into an AC outlet.
6. Adjust the level gauge. (See page 8-1.)
7. Connect a PC-AT keyboard if necessary.
8. Turn the power on and then press the power key. (See page10-1.)
9. Set the following program menus:
If necessary, set the following program menus:
10. Call a PLU which contains the unit price used in weighing mode, then place a weight on the
platter and check a correct price is displayed.
11. The scale is ready to issue labels.
Get user manuals:
See SafeManuals.com
Menu Page ITEM No.
2
0
2
1
1
1
Menu Page ITEM No.
1
2
1
3
1
5
1
7
1
8
1
9
Programming Name
PRINT FORMAT
DATE/TIME SETTING
PLU DATA SETTING
Programming Name
INGREDIENT MESSAGE
NUTRITION SETTING
ADDRESS AND COMMERCIAL
MESSAGE SETTING
SPECIAL INFORMATION
GRADE LINE
SPEED KEY SET
6-1
EM1-31064
6. PROCEDURE BEFORE OPERATION