TOSHIBA TEC Corporation SL-9000 Series Owner's Manual page 11

2. SPECIFICATION
2.2 OPTION
LON
TMCC
MEMO PC Board
(SL-9000 only)
Memory Module
Label Cassette
10 Base T (LAN)
Interface Board
(SL-9000N only)
NOTES: 1. Contact TOSHIBA TEC H.Q. or your nearest TOSHIBA TEC representative.
Get user manuals: See SafeManuals.com
Model No.
Option Name
or Part No.
LON Connector Part No.
TM8P-88P EAJ-0028001
LON Terminal Part No.
Resistor 285D-8P EAJ-0029001
LON Cable Part No.
10319100003
S-STLAN-2P
(200 m/roll)
External Connector OP-9000-IOEC-B
Box
I/O PC Board OP-9000-IOB
TMCC Cable Kit OP-9000-IOCN-
TMCC
OP-9000-
PIGGYBACK
OP-9000-
PIGGYBACK-S/F
OP-9000-RAM-
512KB
OP-9000-SRAM-
512KB
OP-9000-
CASSETTE
OP-9000N-LAN
2. Order from TOSHIBA TEC Parts Center or purchase locally.
3. When purchasing memory modules locally, select one having the following specifica-
tions.
Maker: HITACHI Pseudo Static RAM (OP-9000-RAM-512KB)
HITACHI Static RAM (OP-9000-SRAM-512KB)
Type: HM658512ALP-8V80ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000-
RAM-512KB)
HM628512ALP-770ns, 600mil 32-pin Plastic DIP (DP-32) (OP-9000-
SRAM-512KB)
4. The Memo PC board (Flash ROM type) is installed in the SL-9000N model as
standard.
Description
A modular connector used to connect scales
to each other in a LON configuration.
A modular resistor attached to the scales
connected at both ends of the LON
configuration.
An 8-pin telephone cable used with the LON
connectors attached to both ends of the
cable. This cable connects scales to each
other in a LON configuration.
A junction box to which the TMCC kit is
attached. It is also used with the RS-232
CL/CS kit.
An I/O board equipped with the TMCC
interface and PC-AT keyboard interface ports.
It is used to construct a TMCC system and
program PLU data, etc.
A cable kit for the TMCC interface
This board is used to expand the PLU
memory to 4MB by installing the memory
module.
DIP type PS-RAM to be installed on the
MEMO PC board (OP-9000-PIGGYBACK) for
memory expansion.
When expanding the memory, install the two
modules as one set.
DIP type S-RAM to be installed on the MEMO
PC board (OP-9000-PIGGYBACK-S/F) for
memory expansion.
When expanding the memory, install the two
modules as one set.
It is covenient to change several kinds of
labels.
This board enables the SL-9000N to be used
in a LAN network.
2-2
EM1-31064
2.2 OPTION
Source
See
Note 2
See
Note 2
See
Note 2
See
Note 1
See
Note 1
See
Note 1
See
Note 1
See
Note 1
and 3
See
Note 1
See
Note 1