TOSHIBA TEC Corporation SL-9000 Series Owner's Manual page 48

11. PROGRAMMING PROCEDURES
Table4 : Transmission Item List
ITEM #
2
3
4
5
6
7
8
9
10
11
12
13
14
15
NOTE: When the PL-3, required FDK varies depending on the volume of ING data.
Get user manuals: See SafeManuals.com
Title on the Display
VERIFY PLU & ING = CMT
READ PLU & ING. FM CMT
WRITE PLU TO CMT
VERIFY PLU = CMT
READ PLU FM CMT
WRITE ING TO CMT
VERIFY ING = CMT
READ ING. FROM CMT
WRITE NUTRI. TO CMT
VERIFY NUTRI = CMT
READ NUTRI. FM CMT
WRITE SPEED KEY
VERIFY SPEED KEY
READ SPEED KEY
Be careful of the following when changing a FDK.
a: During the write operation, replace the FDK with a formatted one.
b: Verify and read data in the same order as the write.
To cancel to change a FDK, press the CLEAR key.
Contents of Transmission
2 COMPARE PLU & ING. IN OLD FORMAT
3 READ PLU & ING. IN OLD FORMAT
4 SAVE PLU IN NEW FORMAT
5 COMPARE PLU IN NEW FORMAT
6 READ PLU IN NEW FORMAT
7 SAVE ING. IN NEW FORMAT
8 COMPARE ING. IN NEW FORMAT
9 READ ING. IN NEW FORMAT
10 SAVE NUTRITION IN NEW FORMAT
11 COMPARE NUTRITION IN NEW FORMAT
12 READ NUTRITION IN NEW FORMAT
13 SAVE SPEED KEY IN NEW FORMAT
14 COMPARE SPEED KEY IN NEW FORMAT
15 READ SPEED KEY IN NEW FORMAT
11-22
EM1-31064
11.12 CMT/PL-3
CMT PL-3
: operable, : inoperable