Weighing Operation - TOSHIBA TEC Corporation SL-9000 Series Owner's Manual

Electronic computing scale
Table of Contents

Advertisement

14. OPERATING PROCEDURES

14.1 WEIGHING OPERATION

The weigh mode is used to weigh a commodity and to issue labels. The label contains data such as a
weight, unit price (price per weight) and total price (calculated as a result of the weighing operation).
The following is a basic operation seen at the sales floor of a store or at a back room where different kinds
and weights of commodities are repacked. Pressing the VOID key subtracts the last entry from the
memory.
Example) When PLU #100 and an unit price of $8.00 are set in the speed key #12.
Enter the PLU #.
Available only when the initial
setting # 5-6 is set to 1.
kg scale
NOTES: 1. Pressing the speed key to which no PLU data has been assigned will result in an error. In this case,
Get user manuals:
See SafeManuals.com
Menu: REG., M. DOWN, or REWRAP
Mode: WEIGH
1
0
0
PLU
Press:
lb scale
1/4
1/2
100 g
Place a commodity
on the platter.
(Ex. 1.000 lb.)
PRT
MANUAL:
*
The label is issued.
Press when canceling
the last sales.
press the C key, then press the speed key to which PLU data has been assigned.
2. To change between AUTO and MANUAL, follow the procedure provided in section 14.9.
3. If a unit price exceeding 4 digits is obtained by multiplying by 2 or 4 (when pressing the
1/2 lb key or 1/4 lb key), the unit price will be 0.
4. 100 g key is available only when the scale is a kg scale or operated on kg base.
5. When the 1/2 lb , 1/4 lb or 100 g key is pressed, the unit price will change on the display.
6. When the "compulsory tare" is selected, a tare must be subtracted in a weighing operation, otherwise
an error message "TARE REQUIRED" will be displayed when the following operation has been done:
1 Manual mode: Pressing the PRT/* key
2 Auto mode: Placing a commodity on the platter.
3 Floating vendor mode: Pressing the Vendor key.
When a "TARE REQUIRED" is displayed, refer to Section 14.6 to follow the proper weighing
procedure.
The unit of measure can be changed
LB
for CA model only.
kg
LB ↔ kg
Press the
12
speed key.
<REG.>
T-BONE STEAK
: AUTO
VOID
14-2
14.1 WEIGHING OPERATION
MANU.
WEIGH
lb
UNIT/$
1.000
8.00
PACKED ON
SELL BY
NET WT.
PRICE lb
TEC STORE
(TEL) 0123-45-6789
(Sample label)
EM1-31064
TOTAL $
8.00

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000n-ffb series

Table of Contents