Print Count Operation - TOSHIBA TEC Corporation SL-9000 Series Owner's Manual

14. OPERATING PROCEDURES

14.4 PRINT COUNT OPERATION

With this procedure, a specified number of the same labels can be issued.
Example A) When operating in Weigh mode.
Set the number of labels.
(Max. 99 labels)
Press:
Enter the PLU #.
Press:
PLU data is saved.
Place a commodity on
the platter.
(Ex. 0.700 lb.)
NOTES: 1. A batch issue means to print labels continuously with the backing paper attached.
Get user manuals: See SafeManuals.com
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX or BY-COUNT
Press:
3
PRT
MANUAL:
*
Batch
The labels are issued with
the backing paper attached.
When all the specified numbers
of the labels are being issued.
On-demand issue means to print labels one by one.
2. To check the remaining number, press the PLU and the PRESET COUNT keys.
PRESET
COUNT
5 0
PRT
*
0 9 1
PLU
SAVE
Clear the preset count.
:AUTO
On-demand
The label is issued.
C
14-6
EM1-31064
14.4 PRINT COUNT OPERATION
C
Remove the commodity.
C
PRT
Press:
*