Step 6: Option A - Adapt The Microwave Blower For Outside Top Exhaust - Insignia NS-OTRC15SS9 Installation Manual

Step 6: Option A - Adapt the microwave blower for outside top exhaust

1 Remove and save the two screws that hold the blower plate and blower motor to the microwave.
2 Carefully pull out the blower motor. The wires will extend far enough to let you adjust the blower unit. Do not
disconnect the wires.
Caution: Do not pull or stretch the blower unit wiring. Make sure that the wires are not pinched.
3 Turn the blower unit 90° so that the fan blade openings are facing out the top of the microwave.
4 Place the blower motor back into the opening. The blower unit exhaust openings should match the exhaust openings
on the top of the microwave.
BEFORE
www.insigniaproducts.com
Blower plate screw
Blower plate
Back of microwave
Blower motor screw
Back of microwave
AFTER
Fan blade openings facing the top
NS-OTRC15SS9
17