Table of Contents
Advertisement
SEASONAL MAINTENANCE
(implemented by the DEALER)
Clean the stove internally and externally
In the event of very frequent use of the
oven, it is advised cleaning of the smoke
passage duct and smoke channel every 3
months.
You should clean the chimney system at least once a
year (check local regulations for details).
If you fail to regularly clean and inspect the system,
there is an increased risk of the chimney pot catching
fire.
We remind you not to use compressed air during the
seasonal maintenance for cleaning the air inlet pipe.
REPAIRS
To be performed only by Edilkamin technical
assistance centres/authorised distributors. The names
of Edilkamin technical assistance centres (TAC) and
offi cial, authorised distributors are available ONLY at
62
www.edilkamin.comm
MAINTENANCE
SUMMER SHUTDOWN
During the period of disuse, keep the doors, hatches
and lids closed.
In particularly humid areas, it may be necessary to
disconnect the air intake and fume connector.
SPARE PARTS
For any spare parts, contact your dealer or techni-
cian.
The names of Edilkamin technical assistance centres
(TAC) and offi cial, authorised distributors are availa-
ble ONLY at www.edilkamin.com
Using non-original spare parts may damage the
appliance and relieves Edilkamin of all liability for any
resulting damages. This also invalidates the warranty
on the basis of tampering.
Do not make unauthorised modifi cations.
DISPOSAL
At the end of its service life, dispose of the product as
required by regulations.
In accordance with art. 26 of Legislative Decree no.
49 of 14th March 2014, "Implementation of Directive
2012/19/UE on the disposal of electrical and electronic
devices (RAEE)".
The crossed-out dustbin symbol displayed on
equipment or its packaging indicates that the product
at the end of its life must be collected separately from
other waste.
At the end of its useful life, the user should therefore
deliver the product to a suitable local sorted collection
centre for electrical and electronic devices.
Sorted collection for recycling, treatment and
environmentally compatible scrapping contributes to
the prevention of negative effects on the environment
and health, and promotes the re-use and recycling of
the materials of which the equipment is made.
USER
Advertisement
Table of Contents
