Loading The Multipurpose Feeder - Lexmark W820dn Setup Manual

Loading the
multipurpose feeder
Note:
You can load the multipurpose
feeder with or without the optional duplex
unit attached to the printer.
The multipurpose feeder comes
standard with the printer and holds
approximately 35 sheets of 20 lb paper.
You can use the multipurpose feeder one
of two ways:
•
As a print media tray
In this case, you load print media
in the feeder with the intention of
leaving the media in the feeder.
Make sure you change the Paper
Type and Paper Size settings for
the feeder. See page 94 for more
information.
•
As a manual bypass feeder
In this case, you send a print job
to the multipurpose feeder,
specifying the type and size of
media from your computer. The
printer then prompts you to load
the appropriate print media before
it prints.
This is useful for single-page print
jobs when you want to print on
media you may not keep in a tray,
such as letterhead.
Load print media
83