Unpacking The Finisher - Lexmark W820dn Setup Manual

Unpacking the finisher

CAUTION!
finisher sometime after initial printer
setup, turn the printer off and unplug the
power cord before continuing.
Tabs
If you are installing the
Metal locking bracket
1
Remove the cardboard box by
lifting it straight up and setting it to
the side.
2
Remove the foam from the top of
the finisher and by the legs.
3
Lightly press on the tabs located
on the metal locking brackets near
each leg, and move both brackets
toward the middle of the finisher.
Set up the optional finisher
55