Preface; About Your Printer - Lexmark W820dn Setup Manual

Stacking arm
Jam access door
(Door A)
Multipurpose feeder
Note:
represent the Lexmark W820 model with
the optional high capacity feeder
installed, unless it is necessary to show
another configuration. Depending on the
printer model you have chosen and the
options you install, your printer may look
different.

About your printer

Operator panel
Standard output bin
Tray 1
Front cover
(Door F)
The illustrations in this manual
Three printer models are available:
• The Lexmark W820 printer,
delivering 600 dots per inch (dpi)
resolution at up to 45 pages per
Power
minute (ppm), ships with two 500-
switch
sheet trays. This model comes
with 32MB of standard memory.
• The Lexmark W820n, a network
model, comes with an Ethernet
10BaseT/100BaseTx print server
installed. This model comes with
64MB of standard memory.
•
The Lexmark W820dn, a network
model that ships with a duplex unit
attached.
Tray 2
You may have purchased your
Lexmark W820 as part of a multifunction
device with capabilities such as copying,
faxing, or scanning. For information
about setting up components other than
the printer, refer to the documentation
that came with your multifunction device.

Preface

vii
Preface