Installation/Use - Honeywell Miller TurboLite MFL User Instruction Manual

5.0 Installation/Use

WARNING: All Miller self-retracting lifelines must be inspected and tested
before each use (see 7.0 Inspection and Maintenance).
5.1 Typical Overhead Installation
Miller self-retracting lifelines are typically mounted to
The anchorage must be capable of supporting a
a mounting location.
[Please Note: For the purposes of this instruction
manual, an overhead application implies that there
is no slack in the lifeline when the unit is mounted
above the user and connected to the user's back
D-ring. For non-overhead applications, please
contact Honeywell Technical Service before
proceeding.]
5.2 Tie-Back Installation
designed for such a connection. Refer to the I296
information regarding this installation application.
Us er In stru ctio ns - Engli sh
8
Fig. 3
Fig. 4
Fig. 5