Honeywell Miller SafEscape ELITE SEHWLB FT Series User Manual

Honeywell Miller SafEscape ELITE SEHWLB FT Series User Manual

Rescue/descent device

Advertisement

USER
MANUAL
Miller SafEscape ELITE
Rescue/Descent Device
User manual
I286 MFP9720154
Rev. B July 2020
TM

Advertisement

Table of Contents
loading

Summary of Contents for Honeywell Miller SafEscape ELITE SEHWLB FT Series

  • Page 1 USER MANUAL Miller SafEscape ELITE Rescue/Descent Device User manual I286 MFP9720154 Rev. B July 2020...
  • Page 2: Table Of Contents

    Table of contents 1.0 Purpose .................................. 3 2.0 General Requirements, Warnings and Limitations ..............3 2.1 General Fall Protection Warnings ...................... 3 2.2 System Warnings and Limitations ..................... 3 3.0 SafEscape Model and Parts Identification ....................4 4.0 Installation and Use ..........................5 4.1 Installation ..............................
  • Page 3: Purpose

    Thank You Thank you for your purchase of Miller Fall Protection equipment. Miller brand products are produced to meet the highest standards of quality at our ISO 9001 certified facility. Miller Fall Protection equipment will provide you with years of use when cared for properly.
  • Page 4: Safescape Model And Parts Identification

    Limitations of Use Total Cumulative Max. Weight* This device is intended for single or multiple use for the rescue of Users Descent Distance and evacuation of personnel. 551 lbs (250 kg) 1312 ft (400 m) • Never use this device as a fall arrester. 330 lbs (150 kg) 3280 ft (1000 m) •...
  • Page 5: Installation And Use

    Model SEHWLB Model SE protection must be used. Connectors used to attach the SafEscape Device to the anchor point must also be capable of supporting 3,100 lbs. (1410 Ladder Bracket kg). Make sure that all connections within the system are Provides for easy installation t compatible.
  • Page 6: Use

    WARNING: Another form of anchorage connector MUST IMPORTANT: A full-body harness must be used with the always be used with the ladder bracket to safely secure the SafEscape Rescue/Descent Device. unit to the anchorage of sufficient strength. The ladder Controlling Descent bracket should never be used alone to anchor a SafEscape Descent may be controlled by a person located at the base of Device to a ladder.
  • Page 7 NOTE: Descent may be controlled by a person located at 4. Prior to descent, remove any slack in the lifeline that may the base of the descent or by the descender (see Controlling exist between the user and the device. Once the lifeline is Descent).
  • Page 8: Use Of Accessory Components

    Simultaneous Rescue/Descent To attach the SafEscape Device to the ladder bracket, follow the steps below. In some circumstances, it may be necessary for the rescuer to simultaneously descend with the victim to safety. IMPORTANT: Two-person descents with the SafEscape Step 1 - Align the ladder ELITE Device must not exceed a total combined weight bracket adapter with (including clothing, harness, tools, etc.) of 551 lbs.
  • Page 9 Adjustable Rope Anchor (Part SE-ARA) Anchor Sling (Part SE-AS/4.0FT & SE-AS/2.5FT) The adjustable rope anchor is quick and convenient option for The anchor sling is used to facilitate anchoring the SafEscape anchoring the SafEscape Device to an anchorage point such Device to a variety of anchorage points, such as I-beams, as a ladder.
  • Page 10: Training

    Edge Protector (Part SE-EP) Step 1 - Open the latch and unscrew the locking thumbscrew to open the device. Place the device on the compatible rope An edge protector should be used anywhere the SafEscape lanyard with the arrow label on the rope grab pointing toward lifeline may come in contact with sharp edges.
  • Page 11 SafEscape ELITE Inspection Inspection Factory Rescue/Descent Device Required Required by Recertification Inspection Criteria by User Competent Person Required    For a Properly Stored, Unused Unit ... Before each use At least annually Every 7 years   At least annually AND For a Unit Used in Non-Emergency ...
  • Page 12: Labels

    Labels SPECIFICATIONS W A R N I N G Device intended for single or multiple use. Rated hoisting height: 3,5 m (11 ft) up to 100 kg (220 lbs)--max. 10 lifts [In Emergency, 10 m (33ft) up to 280 kg (617 lbs)--max. 1 lift] Max.
  • Page 13: Descent Log

    Descent Log INSPECTION NUMBER:___________________________________________________________ DATE OF MANUFACTURE:________________________________________________________ MODEL NUMBER:________________________________________________________________ DATE PURCHASED:_______________________________________________________________ NOTE: All descents and lifts must be recorded in the Descent Log. Be sure to refer to the tables in 2.2 System Warnings and Limitations to determine the descent and hoisting limitations, as well as the maximum number of consecutive descents and lifts.
  • Page 14: Inspection And Maintenance Log

    Inspection and Maintenance Log Registre D'inspection et D'entretien Registro de Inspección y Mantenimiento DATE OF MANUFACTURE:_________________________________________________ DATE DE FABRICATION / FECHA DE FABRICACIÓN MODEL NUMBER:________________________________________________________ NUMÉRO DE MODÈLE / NÚM. DE MODELO DATE PURCHASED:______________________________________________________ DATE D’ACHAT / FECHA DE COMPRA INSPECTION MAINTENANCE CORRECTIVE...
  • Page 15 ® MILLER FALL PROTECTION PRODUCTS TOTAL SATISFACTION ASSURANCE At Miller Fall Protection, we have been providing quality Miller brand fall protection equipment to millions of workers worldwide since 1945. LIMITED LIFETIME WARRANTY BACKED BY OVER 65 YEARS IN THE FALL PROTECTION BUSINESS We sincerely believe that our fall protection equipment is the best in the world.
  • Page 16 For more information www.honeywellsafety.com Honeywell Industrial Safety P.O. Box 271, 1345 15th Street Franklin, PA 16323 USA Toll Free: 800.873.5242 Fax: 800.892.4078 E-mail: hsptechsupport@honeywell.com...

Table of Contents