Table of Contents
Advertisement
HSUART3/RS485
Select this to enable UART to support HSUART/RS485. Each HSUART pin con-
flict dependency is similar to UART
UART4
To assign this device to host owned, you must enable PSE UART0 to host
owned because UART0 is the function0 of this device. UART0 has no pin con-
flict. UART1 has pin conflict with TGPIO. UART2 is default enabled for PSE log-
ging purpose. UART3 has conflict with GBE0-1, PWM and TGPIO.
UART5
To assign this device to host owned, you must enable PSE UART0 to host
owned because UART0 is the function0 of this device. UART0 has no pin con-
flict. UART1 has pin conflict with TGPIO. UART2 is default enabled for PSE log-
ging purpose. UART3 has conflict with GBE0-1, PWM and TGPIO.
QEP0
To assign this device to host owned, you must enable PSE I2C7 to host owned
because I2C7 is the function 0 of this device. If it is grayed out, check the above
options. The same pin cannot be assigned to multiple IP
QEP1
To assign this device to host owned, you must enable PSE I2C7 to host owned
because I2C7 is the function 0 of this device. If it is grayed out, check the above
options. The same pin cannot be assigned to multiple IP
QEP2
To assign this device to host owned, you must enable PSE I2C7 to host owned
because I2C7 is the function 0 of this device. If it is grayed out, check the above
options. The same pin cannot be assigned to multiple IP
QEP3
To assign this device to host owned, you must enable PSE I2C7 to host owned
because I2C7 is the function 0 of this device. If it is grayed out, check the above
options. The same pin cannot be assigned to multiple IP
I2C0
If I2C0 is not set to host owned, I2C 1-6 could not be set to host owned too due
to sharing same function
I2C1
To assign this device to host owned, you must enable PSE I2C0 to host owned
because I2C0 is the function 0 of this device. I2C1 has pin conflict with TGPIO8-
9, I2C2 has no pin conflict. I2C3 has pin conflict with TGPIO18-19.I2C4 has no
pin conflict. I2C5 has pin conflict with PWM.I2C6 has no pin conflict.
I2C2
Grayed out to reserve for ECLite
I2C3
To assign this device to host owned, you must enable PSE I2C0 to host owned
because I2C0 is the function 0 of this device. I2C1 has pin conflict with TGPIO8-
9, I2C2 has no pin conflict. I2C3 has pin conflict with TGPIO18-19.I2C4 has no
pin conflict. I2C5 has pin conflict with PWM.I2C6 has no pin conflict.
I2C4
To assign this device to host owned, you must enable PSE I2C0 to host owned
because I2C0 is the function 0 of this device. I2C1 has pin conflict with TGPIO8-
9, I2C2 has no pin conflict. I2C3 has pin conflict with TGPIO18-19.I2C4 has no
pin conflict. I2C5 has pin conflict with PWM.I2C6 has no pin conflict.
63
SOM-2532 User Manual
Advertisement
Table of Contents
