Parking Continuous Forms And Changing Tractor Feeders - Lexmark Forms Printer 4227 Plus User Manual

6
Place a single sheet against the left paper guide. Move the right paper
guide so that the guide aligns with the right edge of the paper.
The Paper Empty/Add Paper message disappears.
a
If Auto Cut Sheet Load is On (factory default), the paper feeds
automatically to the top of the form. For help, see "Setting Auto
Cut Sheet Load" on page 56.
b
If Auto Cut Sheet Load is Off, press FormFeed.
7
Make sure the printer is online (Ready light is on solid). If it is not,
press Start/Stop until the Ready light is on solid. You are now ready to
print.
Parking Continuous Forms and Changing Tractor
Feeders
The Tractor 2 light on the operator panel shows you which tractor feeder is
selected. The Tractor 2 light is On when the Tractor 2 Feeder is selected.
To park continuous forms on the currently selected tractor feeder and switch
to the other tractor feeder:
Right Paper Guide
Chapter 5: Printer Options
97