Lexmark Forms Printer 4227 Plus User Manual page 43

Main Menu
Paper Handling Options
If "Enable" is selected in
"Default Macro", this item
appears in the macro options
menu.
* - These settings are active
for the current tractor
selected.
Primary Options
Auto Tear-off
If on, moves the top perforation of a
continuous form to the tear bar.
Auto Cut Sheet Load
If on, automatically loads cut sheets
into the printer.
Auto Sheet Feed
Automatically feeds cut sheets if
using Auto Sheet Feeder.
Does not appear when the Tractor 2
Option is installed.
Tractor
Select this option when you want to
set the default tractor.
Does not appear unless the Tractor 2
Option is installed.
Form Length*
Allows you to specify the length of
the paper you are using.
Left Margin*
Right Margin*
Bottom Margin*
Lines Per Inch
Adjusts the number of lines that print
per inch.
Eject by FormFeed
Automatically ejects your print job
when it has finished printing.
Chapter 3: Using the Operator Panel
Secondary Options
On, Off, One Second
On, Off
On, Off
Tractor 1, Tractor 2,
Tractor 1 + 2
1LPP/0.17" to
132LPP/22.00"
A4/296.3 mm
0", 1", 2", 3"
4", 5", 6", 7", 8", 13.6"
0", ½", 1", 2", 3"
3, 4, 6, 8
On, Off
37