Lexmark Forms Printer 4227 Plus User Manual page 100

14
Select Tractor 2 from the menu.
15
Press Start/Stop. The paper loads to the print position or the tear-off
position if Auto Tear-Off is On.
16
Make sure the printer is online (Ready light is on solid). If it is not,
press Start/Stop until the Ready light is on solid. You are now ready to
print.
17
Read "Parking Continuous Forms and Changing Tractor Feeders" on
page 97 to learn how to switch from one tractor feeder to the other.
When printing the first page on continuous forms, line spacing within the first
1½ inches of the form may not be uniform.
Loading Cut Sheets in the Tractor 2 Feeder
Use the manual feed tray on the Tractor 2 Feeder to load single sheets. Use
only single sheets of paper or single-part forms.
1
Turn the printer On.
2
Make sure the paper path is clear. If continuous forms are loaded in
the printer, park them:
a
Tear off the leading edge of the continuous forms.
94
Chapter 5: Printer Options