Network Printing - Lexmark E320 Setup Manual

Macintosh

Network printing

Windows
Note:
Using the Lexmark E322
custom printer driver and a
Lexmark network port provides
enhanced functionality, such as
printer status alerts.
installation. Detailed instructions are provided for parallel and USB
connections.
If you are setting up the printer for local printing, you need to install
the Lexmark E320 PPD and use it with the LaserWriter 8 printer
driver or the Adobe PostScript driver.
The Lexmark E320 PPD and specific information about local printer
installation on Macintosh computers can be found on the drivers CD
that shipped with your printer.
After the printer is installed, print a test page to verify your printer is
correctly set up.
If you have a Lexmark E322n, the following instructions explain how
to install printer drivers on printers attached to a network.
Ports
The following network printer ports are supported:
•
Microsoft IP port (Windows NT 4.0 and Windows 2000)
• Lexmark network port (Windows 95/98/Me, Windows NT 4.0,
and Windows 2000)
Printer drivers
The following printer drivers are supported:
•
Windows system printer driver
•
Lexmark E322 custom printer driver
System drivers are built into Windows operating systems. Custom
drivers are available on the drivers CD.
Updated system and custom drivers are available on the Lexmark
Web site at www.lexmark.com.
Install printer drivers
39