Lexmark C910 Reference Manual page 287

Table 4-21: PostScript Emulation Device Parameters (Continued)
Key Type
PortLocation string
PSSmartSwitch boolean
Type name
Device Parameters for the Communication Device %Serial%, %SerialA%, %SerialB%, %SerialC%, %SerialD%
(%Serial_NV% and %Serial_Pending% contain the same parameters)
Baud integer
CheckParity boolean
DataBits integer
DelayedOutputClose boolean
Enabled boolean
Filtering name
4-91
Definition
(Read-only) Designates the physical location of the port related to the
parameter set. Supported values are:
Standard Port
Option Slot 1
Option Slot 2
Option Slot 3
Option Slot 4
Supported values are:
True PS SmartSwitch is set to On.
False PS SmartSwitch is set to Off.
For more information, see "Using SmartSwitch" on page 4-1.
(Read-only) Always returns the value of /Communications.
Returns the value of the
Baud
(Read-only) Designates whether parity checking is done on the incoming
data. Supported values are:
True menu item set to Even or Odd.
Parity
False menu item set to None or Ignore.
Parity
Returns the value of the Data Bits
Selects how the printer manages the port at the end of each print job.
Supported values are:
True An end-of-file message is not sent until the current job and all
preceding jobs finish printing.
False An end-of-file message is sent as soon as a job finishes
executing in the interpreter, whether or not that job has
finished printing.
This value is set independently for each port.
(Read-only)
Supported values are:
True
False
Indicates if the input needs further filtering before the data can be correctly
processed. Supported values are:
InterpreterBased
None
PostScript
menu item.
menu item.