Common Variables For Pcl Emulation - Lexmark C910 Reference Manual

Common Variables for PCL Emulation

Note:
Use these variables only for PCL emulation. The
parameter should be specified as
To determine which variables your printer supports, see Table B-3: "Common
Variables for PCL Emulation" on page B-13.
Table 3-5: Common Variables for PCL Emulation
Variable
FONTNUMBER
FONTSOURCE
PITCH
PTSIZE
SYMSET
The word common applies to those variables common to both your printer
and the Hewlett-Packard Company's LaserJet printers.
Function Selections
Font Number 0, 1, .... n
Font Source I, S, M1, M2, M3, M4, D1
I
S
M1, M2,
M3, M4
D1
All other values default to internal font source.
Default pitch 0.08 to 100 (in increments of 0.01)
(fixed-pitch fonts)
Note: If an invalid pitch is requested, the printer
selects the closest pitch.
Default point size 1 to 1008 (in increments of 0.25)
(proportional
Note: If an invalid point size is requested, the
spaced fonts)
printer selects the closest point size.
Symbol set for the For a list of the values for the Lexmark C720,
default font see Table 2-20 "Symbol Set Support for PCL
Emulation Text Fonts" on page 2-34 and Table
2-21 "Non-Text PCL Emulation Symbol Sets" on
page 2-36.
For a list of values for the Lexmark J110, see
Table 2-28 "Lexmark J110 Fonts" on page 2-48
and Table 2-29 "Lexmark J110 Typefaces and
Symbol Set IDs" on page 2-49.
If a symbol set is requested that is not resident
in the printer, the symbol set is not changed.
3-48
: . For example:
Internal font source
Permanent download fonts
Flash font source
Disk font source
PJL
Factory Default
0
I
10.00
12.00
PC-8, PC850
(Country specific)