Lexmark C910 Reference Manual page 139

Table 3-4: Printer Unique Variables for Both Printer Languages (Continued)
Variable
LPPDS
(DEFAULT only)
LPPDSFORMLINES
(DEFAULT only)
LPPDSLINESPERINCH
(DEFAULT only)
LPREPRINTEDLENGTH
(DEFAULT only)
LPREPRINTEDLOADING
(DEFAULT only)
Function Selections
Activate ON, OFF
Personal Printer
Use ON to enable PPDS printer language and OFF to
Data Stream
disable PPDS printer language. After this command is
(PPDS) printer
processed, the printer performs a Power On Reset
language
(POR) to activate the changes.
Note: The following printer settings in NVRAM are
changed when PPDS is activated:
• PCL and PS SmartSwitch settings for each port are
turned off
• Printer Language is set to PPDS
Lines Per Page 1 to 255
(PPDS)
Lines Per Inch 0.25 to 30.00 in increments of 0.25
Note: If a Lines Per Inch setting outside this range is
specified, the printer defaults to the closest number in
the range.
Preprinted NORMAL, SHORT
Paper Length
Preprinted OFF, DUPLEX
Paper Loading
3-41
Factory Default
OFF
64, 68
(Country specific)
6.00
NORMAL
OFF
PJL