Lexmark C910 Reference Manual page 186

Table 3-22: Variables for Flash and Disk File and Password Commands (Continued)
Parameter Syntax
DEVICE =
DEVICE =
FILENAME = "fname"
OLDFILENAME = "fname"
NEWFILENAME = "fname"
3-88
Description
File storage media. Case insensitive.
The value is used for the LRUNFILE command only.
Note: The command is ignored if the device is not installed.
File storage media.
Fname is comprised of a filename, a unique identifier for a
file, and a filetype, which specifies the type of file. The format
is .
The must be one of the following:
PCL macros
PCL symbol sets
PCL fonts
data, Type 1 fonts, demo files
(case sensitive)
The must be one of the following:
PostScript font
PCL scalable font
PCL bitmap font
PCL macro
User Data
PostScript font
Demo
PCL scalable font
PCL bitmap font
PCL macro
PCL symbol set
PPDS bitmap font
PCL XL user stream
All fname specifications must be enclosed in quotation marks
and cannot exceed 127 characters.
If the file is password-protected, the password must be
provided in order to unlock the file.
For additional information about passwords, see "File and
Device Protection Commands" on page 3-93.
PJL