Turning On The Printer - Lexmark C912 Setup Manual

Turning on the
printer
1
Plug one end of the power cord into the socket on the side of the
printer and the other end into a properly grounded outlet.
2
If you installed an optional high capacity feeder, plug one end of
the high capacity feeder power cord into the socket on the side
of the high capacity feeder and the other end into a properly
grounded outlet.
3
Turn on your printer.
• If the printer is attached locally, leave the computer and any
other attached devices turned off. You will turn these on in a
later step.
• If the printer is attached to a network, you can turn on any
other peripherals.
After the printer completes its internal tests, the Ready
message indicates that the printer is ready to receive jobs.
If you see a message other than Ready on the display, refer to
the publications CD for instructions on clearing the message.
Look for information about understanding printer messages.
4
If you attached your printer locally, continue with "Step 8: Install
drivers for local printing" on page 54.
If you attached your printer to a network, continue with "Step 9:
Verify printer setup" on page 64.
Attach cables
53