Table of Contents
Advertisement
INSTALLATION
Cautions
The cooktop MUST BE installed by qualified personnel or technicians.
Please never conduct the operation by yourself.
• The cooktop shall not be mounted close to cooling equipment, dishwashers and
rotary dryers. There will be a dedicated power source for the cooktop.
• The cooktop shall be installed with sufficient ventilation to ensure its reliability.
• The wall, work surface, adjoining cupboards, doors and adhesives shall be able
to withstand high heat generated by the cooktop.
• For cleaning, steam cleaners are not to be used.
• This ceramic cooktop can be connected only to a supply with system impedance
no more than 0.427 ohm. In case necessary, please consult your supply authority
for system impedance information.
• The cable must not be bent or compressed. If the cable is damaged or needs
replacing, this should be done only by a qualified after-sales technician. Regular
checks on the cable by a qualified technician is recommended.
• If the appliance is being connected directly to the mains supply, an omnipolar
circuit breaker must be installed with a minimum gap of 3mm between the
contacts.
• The installer must ensure that the correct electrical connection has been made
and that it complies with safety regulations.
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant local
standards to a single-pole circuit breaker. The method of connection is shown
below. Power cord is not accessible after installation.
30
Advertisement
Table of Contents
