Selecting Symbol Sets For Lexmark C935, X940E, And X945E; Specialty Pcl Fonts - Lexmark X940E Technical Reference

Your Lexmark printer defaults to the forward compatibility mode to enable a Hewlett-
Packard Company's driver to select the forward compatibility fonts. The Lexmark PCL
emulation driver uses the backward compatibility mode and temporarily switches the
printer to this mode. The PCL (PJL) emulation commands to switch the default
compatibility modes are:
Forward
Backward

Specialty PCL Fonts

The following table lists the font selection commands for forward and backward
compatibility mode for each of the five specialty PCL emulation fonts. Since the font
selection commands for the forward and backward compatibility modes are identical,
they are listed together in the table. These fonts are supported only in PCL 5
emulation, not in PCL XL.
Table 2-5: Forward and Backward Compatibility Font Selection Commands
Standard PCL Emulation Font Name
C39 Narrow
C39 Regular
C39 Wide
OCR-A
OCR-B
1
These fonts are not implemented in the Hewlett-Packard Company's LaserJet 4050.

Selecting Symbol Sets for Lexmark C935, X940e, and X945e

To determine if a font or typeface supports a symbol set, see the complete listing of
PCL emulation fonts and symbol sets in the following tables: "Table 2-8: C935dn,
C935dtn, C935dttn, C935hdn PCL Emulation Symbol Sets - Specials" on page 2-27
and "Table 2-12: X940e, X945e PCL Emulation Symbol Sets - Specials" on page 2-44.
ESC %-12345X@PJL DEFAULT LPARM:PCL LFONTCOMPATIBILITY=PCL6
@PJL RESET
ESC %-12345X
ESC %-12345X@PJL DEFAULT LPARM:PCL LFONTCOMPATIBILITY=PCL5
@PJL RESET
%-12345X
ESC
Forward and Backward Compatibility Mode
Spacing
1
1
1
0
0
2-14
Style Weight
0 0
0 0
0 0
0 0
0 0
PCL
1
Typeface
32774
32772
32777
23584
23590