Device Attendance Commands - Lexmark X940E Technical Reference

Device Attendance Commands

To determine which commands your printer supports, see "Table B-15: Device
Attendance Messages" on page B-30.
RDYMSG Command
The RDYMSG command is used to specify a message that appears on the first line of
the printer control panel display or through MarkVision Professional whenever the
printer is ONLINE (in the
Ready
Syntax:
@PJL RDYMSG DISPLAY = "message"[<CR>]<LF>
OPMSG Command
When an OPMSG command is received, the message appears and is allotted both
lines of the display. The printer is taken OFFLINE. This message, along with the
STMSG command, is the lowest priority, so if another intervention occurs, it displays
instead.
Note:
A printer reset is not available from the printer control panel or through MarkVision
Professional while
Syntax:
@PJL OPMSG DISPLAY = "message"[<CR>]<LF>
Ready
or message.
Busy
See your printer documentation for information about how to return your
printer to the ONLINE state. Once in the ONLINE state, the
message appears on the printer control panel display or through
Waiting
MarkVision Professional.
OPMSG displays.
3-72
or state). This message displays instead of the
Busy
PJL
, , or
Ready Busy