Common Variables for PostScript Emulation
Note:
Use these variables only for PostScript emulation. The
parameter should be specified as
@PJL SET LPARM:POSTSCRIPT JAMRECOVERY=OFF[<CR>]<LF>
To determine which variables your printer supports, see "Table B-5: Common
Variables for PostScript Emulation" on page B-12.
Table 3-7: Common Variables for PostScript Emulation
Variable
JAMRECOVERY
PRTPSERRS
The word common applies to those variables common to both your printer
and the Hewlett-Packard Company's LaserJet printers.
Function
Selections
Jam Recovery
ON, OFF
For queries, when the Jam Recovery setting is set
to Auto, PJL returns the value of OFF. The
remaining two Jam Recovery values, On and Off
are returned by PJL as ON and OFF respectively.
When PJL is used to set Jam Recovery OFF, the
setting is actually set to Auto. When PJL is used to
set Jam Recovery ON, the setting is set to ON.
Changing this variable also affects PCL emulation.
Print PS Errors
ON, OFF
3-43
[command modifier:value]
:
. For example:
LPARM
POSTSCRIPT
PJL
Factory
Default
OFF
OFF