Unformatted Disk; Routine Maintenance Needed; Cartridge Low - Lexmark X860DE 3 User Manual

Lexmark x860de 3: user guide
Hide thumbs Also See for X860DE 3:
Table of Contents

Advertisement

63 Unformatted disk

Try one or more of the following:
Touch Continue to clear the message and continue printing.
Format the printer hard disk.
If the error message remains, the hard disk may be defective and require replacing.

80 Routine maintenance needed

The printer needs to have routine maintenance done. Order a maintenance kit, which contains all the items necessary
to replace the pick rollers, the charge roll, the transfer roller, and the fuser.
84 Insert photoconductor
Install the specified photoconductor to clear the message.
84 Photoconductor low
1
Press the up or down arrow button until
2
Order a replacement photoconductor immediately. When print quality is reduced, install the new
photoconductor.
84 Replace photoconductor
The printer will not print any more pages until the photoconductor is replaced.
Replace the specified photoconductor.
84 Photoconductor abnormal
An unacceptable photoconductor has been installed in the device. Replace the photoconductor.

88 Cartridge low

The toner is low. Replace the print cartridge, and then touch Continue to clear the message and continue printing.
88 Replace cartridge to continue
Replace the toner cartridge.
298.01 Scanner Missing - Cable Unplugged
The scanner was not detected. Make sure the scanner is properly connected.
1565 Emulation error, load emulation option
The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware
card.
To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com.
Continue appears, and then press
Troubleshooting
230
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

19z0100 - x 860de 3 b/w laserX860deX862deX864de

Table of Contents