Memory Card; Flash Memory Card; Hard Disk With Adapter - Lexmark X860DE 3 User Manual

3
Make sure paper guides are aligned against the edges of the paper.
4
Make sure the paper tray closes properly.
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
M
AKE SURE THE PAPER TRAY IS INSTALLED CORRECTLY
If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may
not be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation
that came with the paper tray, or go to www.lexmark.com/publications to view the paper tray instruction sheet.
Solving 2,000-sheet drawer problems
Try one or more of the following:
T
HE ELEVATOR TRAY IS NOT WORKING PROPERLY
Make sure the printer is properly connected to the 2,000-sheet drawer.
•
Make sure the printer is turned on.
•
Make sure that the power cord is plugged firmly into the back of the 2,000-sheet drawer.
•
If the tray is empty, then load paper in the tray.
•
Clear any jams.
•
T
HE PAPER FEED ROLLERS DO NOT TURN TO ADVANCE PAPER
Make sure the printer is properly connected to the 2,000-sheet drawer.
•
Make sure the printer is turned on.
•
T
HE PAPER CONSISTENTLY JAMS IN THE DRAWER
Flex the paper.
•
Make sure the drawer is properly installed.
•
Make sure paper is loaded correctly.
•
Make sure the paper or specialty media meets specifications and is not damaged.
•
Make sure the guides are positioned correctly for the paper size loaded.
•

Memory card

Make sure the memory card is securely connected to the printer system board.

Flash memory card

Make sure the flash memory card is securely connected to the printer system board.

Hard disk with adapter

Make sure the hard disk is securely connected to the printer system board.
Troubleshooting
270