3
Remove the additional bins.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
58 Too many disks installed
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the extra disks.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
58 Too many flash options installed
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the excess flash memory.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
58 Too many trays attached
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the additional trays.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.
61 Remove defective disk
Try one or more of the following:
Touch Continue to clear the message and continue printing.
•
Install a different printer hard disk before performing any operations that require a printer hard disk.
•
62 Disk full
Try one or more of the following:
Touch Continue to clear the message and continue processing.
•
Delete fonts, macros, and other data stored on the printer hard disk.
•
Install a larger printer hard disk.
•
Troubleshooting
229